Building Instructions

These are instructions on how to build the:

• Pull-up Bar

You can find more building instructions and tips and tricks about the competition on this page.

This is a steering mechanism made to look like a fish tail, so that you can make the coolest fish robot that steers like a fish. It uses a medium motor to move left and right. You can combine it with other modules to make your sea creature robot with a tail!

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

It's the third version of the VEX IQ Easy Bot with rotated Robot Brain and castor wheel.

Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.

The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules. 

- you should attach it to the motor, depending on the orientation of the motor

- you should attach it to the motor, depending on the orientation of the motor.

This attachment for the Nautiq robot is designed to accomplish M15 Research Vessel in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It includes one detachable part: the hook is removed after collecting the Research Vessel, and the remaining part is used to deliver it to its target location.

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

These are 3D Building Instructions for M15 Research Vessel mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Research Vessel for additional building possibilities.

An advanced LEGO SPIKE Prime grabber.

In Arabic, "mustakshif" means "explorer."

This simple robot uses two wheels connected to medium motors for movement. It also has an ultrasonic sensor at its front.

In Portuguese, "observador" means "watcher."

This stationary robot has a distance sensor connected to a motor. It is designed to resemble a lighthouse combined with a watchtower.

Mitko is an example for a small robot from LEGO Education SPIKE Prime. It has no sensors, but it has a big container, like a big mouth. So it can collect things, although it can not see them. Like a small animal that is blind, but hungry. Mitko could be used as a base for a robot that needs to collect. In was one of the versions of a robot that we used for a World Robot Olympiad competition.