Building instructions with dimensions on the ball collecting mechanism for the FIRST Technical Challenge Push Bot. The collecting mechanism should be attached to the Chassis - https://www.fllcasts.com/materials/382-ftc-push-bot-chassis-from-tetrix
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
The offset beam creates a hook-like motion when rotating the gear, making "hooking" in loops an easy task.
These are 3D Building Instructions for M07 Angler Fish mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Angler Fish for additional building possibilities.
In Maori, "poti" means "boat."
This robot is made to look like an ancient boat. It moves using two motors with wheels. On top, it has one mast with a square sail, controlled by a single motor!
This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that
3D building instructions for the Toy factory mission model from the FIRST LEGO League 2022-2023 competition. Find the parts in Bag 13
Building instructions for a LEGO SPIKE Robot that we call the Five-Minute Bot because it could be built in Five Minutes.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is a mechanical cannon that uses the mechanical strain on the plastic LEGO beams to shoot a ball. Because of that the Ball size is very important. It is made to work with standard balls for a ball pool and even better with 41250 52mm LEGO Ball. The mechanism is powered by an EV3 Large motor.
Program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit
Building instructions for Tower Trunk. The trunk is designed to store cubes and then drop them on a desired spot. It can be used alongside Cube Collector 2 as an attachment for VEX Robot Base 1.
Building instructions for the second module of the Ugbroid robot - the Base.
In Icelandic, "lausn" means "solution."
The robot is made to catch loops of a particular color. It moves using two medium motors with small wheels. It also has a color sensor on its side to detect the color of the loop. On the same side, there's also a mechanism to catch the loop, powered by a large motor!
In Finnish, "kuhmu" means "bump."
This robot was designed to resemble a bumper car and to teach a very important lesson about inertia and the center of mass! Its hub is attached pinlessly to the construction, allowing you to move it around and experiment with the robot's center of mass. The robot moves using two wheels attached to two medium motors. It also has a force sensor in front to detect when it bumps into something!
