 
            
    Containers mission models. FLLCasts Off-season Challenge 2019
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
- #778
- 22 May 2019
 
            
    Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
 
            
    We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
 
            
    It's the third version of the VEX IQ Easy Bot with rotated Robot Brain and castor wheel.
 
            
    Building instructions for a VEX IQ attachment for throwing balls with rubber bands.
 
            
    Building instructions for Module 1 of the Modular EV3 LEGO Mindstorms vehicle - the Trunk.
The goal of this robot is to teach students how to build modular robots. This first part is just one of the modules.
 
            
    - you should attach it to the motor, depending on the orientation of the motor.
 
            
    - you should attach it to the motor, depending on the orientation of the motor
 
            
    These are 3D Building Instructions for M08 Artificial Habitat mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Artificial Habitat for additional building possibilities.
 
            
    These are 3D Building Instructions for M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Feed the Whale for additional building possibilities.
 
            
    Alternative to Bag 14 - Cargo Plane Alternative Model - FIRST LEGO League 2021-2022 CARGO CONNECT
 
            
    These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.
 
            
    3D building instructions for the Dinosaur toy mission model from the FLL 2022 competition. Find the parts in Bag 9 of the set
 
            
    The robot's name comes from the Hungarian word megállíthatatlan which means "unstoppable."
This robot is made to go infinitely around the room. The force sensor in front of it, combined with the shield, helps it detect whenever it has collided with something and then turn! Can you make it unstoppable?
 
            
    Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.
 
            
    This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.
 
            
    This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want