Magical Wardrobe from LEGO Education SPIKE Prime in 3D building instructions
This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.
- #1240
- 04 Jan 2021
This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.
Do you like playing bowling? How about playing it with a Mindstorms 51515 Robot Inventor set? Well, these are the building instructions for the bowling pins and "playground". In order to play bowling with a robot, you'll first have to build one. This particular construction was created to be used with Tricky - the smallest Inventor robot - and its Kick the ball attachment. You could later spice things up and try to play it with the Turning attachment for Tricky.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
Go, robot, grab the ball!
If you want to have some fun and play some ball grabbing with your Mindstorms Robot Inventor 51515 set, these are the building instructions you'll need. As you probably know, Tricky is the smallest robot made from this set. With this ball grabbing attachment, you could program Tricky to grab the Mindstorms/Duplo ball, which is included in the set, and place it wherever you want.
You can find the LEGO set, with which this was built, by following this link.
You can find other attachments for Tricky, by following the links below:
You can find constructions created to play with Tricky, by following the links below:
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
Както може би сте забелязали, в последно време всички готини деца строят тенсегрити структури. Затова ние решихме да направим една за тези от вас, които имат Спайк прайм комплект и искат да си построят своя! Също така тази тенсегрити структура изисква само части от комплекта, което означава че нямате нужда да връзвате конци към греди и други части!
На върха на структурата има 2 напълно работещи мотора! Можете ли да направите нещо яко с тях?
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
Инструкции за Модул 1 на Модулния автомобил от ЛЕГО EV3 Mindstorms - Багажник.
Целта на този робот е да научи учениците как да построяват модулни роботи. Тази първа част съдържа само един от модулите.
This is the initial construction of a catapult. The base on which we will place the rest of the robot. The goal of this construction is to give the catapult the ability to rotate.
This attachment for the Nautiq robot is designed to accomplish M10 Send over the Submersible in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It uses a gear mechanism to lift a LEGO axle, allowing the submarine to slide to the other side.
These are 3D Building Instructions for M12 Feed the Whale mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Feed the Whale for additional building possibilities.
Кадере, от латински, означава падане.
Този робот е направен да прилича на падаща кула от увеселителен парк. Използва големият техник зъбен венец за да достигне голяма височина. Зъбния венец се движи от голям мотор. На падащата платформа има място за ЛЕГО минифигура, което може да се маха. Това може да се усети чрез сензор за разстояние, което означава, че атракцията работи само когато на нея има някой!
These are 3D building instructions for an extensible and configurable attachment for FIRST LEGO League 2021 Cargo Connect and the Sorting Center mission. The attachment has 3 axles, and we can place these axles in all kinds of configurations.
An attachment for accomplishing the Cargo Connect M01 innovation project model mission. It is used to guide the mission model.>
3D building instructions for the Dinosaur toy mission model from the FLL 2022 competition. Find the parts in Bag 9 of the set
We use this attachment to discuss how an attachment and a module from LEGO Mindstorms Robot Inventor could be build in an easy to detach fashion. Check out the tutorial in the lesson for this attachment for more information about Detachable Modules
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
You can't play basketball without a hoop. So here are the building instructions of a Basketball hoop built with LEGO Mindstorms 51515 Robot Inventor set. The other things you'll need to play this game at your own home are a Mindstorms/Duplo ball, which is included in the set, and, of course, a robot. This hoop construction was created to be used with the smallest Inventor robot Tricky and its Basketball attachment. When you are ready with the constructions, you have to program the robot and start playing. Who will score more points in this robotics basketball game?
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below: