These are 3D Building Instructions for M14 Sample Collection mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. This mission model does not have an alternative due to the specificity of the parts.
Яшлъ, от турски, означава стар човек.
Този робот е направен за запознаване с цветния сензор. Той се движи с помощта на два средни двигателя и има цветен сензор отстрани.
Колесо, от словашки, означава колело.
Този робот е направен да се движи като моноколело. Това става като премества ценъра на тежестта си по голям техник зъбен венец. За да постигне това използва два средни мотора с малки зъбни колела на тях. Роботът не може да завива, но е доста готин!
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
3D building instructions for the watch television LEGO mission model from the FLL 2022 competition
Attachment for grabbing loops build from LEGO MINDSTORMS Robot Inventor 51515 set. We use this robot attachment to accomplish missions with loops at FIRST LEGO League. Well, we use the principle, that is what's important. Check out the attachment and the course to understand the principle of grabbing loops.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
Това е модул, който прилича на глава на риба. Той използва сензор за допир като уста и иначе е изцяло за красота. Модулът се използва в Писцис - LEGO Mindstorms EV3 робот Риба.
This field has a square canvas size of 1000mm.
The round sumo circe is with an outside diameter of 770mm.
There is a cross to incate the center of the ring for easier measuring to it.
The filed should be printed on a 1000mm X 1000mm canvas with 100% scale and 0 margins.
Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.
This robot is robot based on Roberto Chassis. It is equiped with a pushing rack. You can add something to the rack so it can do some other jobs.
The program for this robot is at programs/ajk7i1-roberto-with-rack-for-pushing-to-the-left-and-right-side-vex-iq-robot.
In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI
It's the second version of VEX IQ Easy Bot. It's simple as the first one, but the motors are rotated.
Инструкции за четвъртия модул, версия 2, на робота Ugbroid - задни колела.
Инструкции за четвъртия модул, версия 1, на робота Ugbroid - задни колела.
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
