User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Building instructions for this part of the BigDaddy competition robot
Instructions for building the five minutebot used in the tutorial.
Сложното в този механизъм са краката на стоножката. По-долу имате инструкции за тях.
Останалата част от стоножката трябва да създадете сами по картинката по-долу.
Този робот трябва да се свали, за да се построи.
This attachment for the Nautiq robot is designed to collect the Krill, the Reef Segments, and the Water Sample, while accomplishing M05 and M10 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It combines multiple functions to complete several missions efficiently in a single run.
This attachment for the Nautiq robot is designed to accomplish M12 Feed the Whale in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It demonstrates how to use mission models as part of a passive mechanical trigger and how to apply carabiner mechanisms for purposes other than locking.
This is the mat that's needed for level B2 from the SPIKE Prime curriculum. It features a sumo field with a curved outer line for line following. It also has 3 red and 3 green lines for tasks that need the robot to stop at first and third line.
The size is set in the pdf so you can print it as is.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.
The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.
These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.
This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.
These are 3D Building Instructions for M10 Sonar Discovery mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Sonar Discovery for additional building possibilities.
This is an attachment for the Chain Monster robot and it accomplished three missions that are all push and deliver. It technically is not used for the M09 dinosaur toy, but this is because the toy is on the robot while the attachment is below the robot
Third version of a reusable gear attachment. In this scenario a single motor could power two different axles in two different directions. If you use it to accomplish a mission do not forget to send us a video. We would love to see it.
