Building Instructions

These are instructions on how to build the:

• Colored health units
• Season tiles

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Heavy Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.

Step by step guide on how to add the SD card to the Raspberry pi. 

The Raspberry Pi must not be powered.  

3D scheme with instructions on how to connect the L298N driver to the batteries and to the motor. Just that. Connecting to the Raspberry Pi is at a later stage of the course. 

3D scheme on how to connect the L298N Motor Driver to the Batteries. Follow the step-by-step instructions. Be careful about the PCB terminal connectors.

These are 3D building instructions on how to connect a diode directly to the batteries and turn it on. 

In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this

Shows the pipe attachment constructions that is mounted on the robot. The pipe is than mounted on this constuctions

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. Due to the way, the attachment is left on the mission model, it slides from, creating distance between itself and the mission model, therefore meeting the requirement that no attachment should be touching the mission model at the end of the competition. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is the Chicken mission model from the World Robot Olympiad 2024 Elementary competition in 3D assembly instructions.

These are 3D Building Instructions for the Precision Tokens and Badges model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

Alternative to Bag 13 - Truck Airplane and Activators Alternative Model - FIRST LEGO LEAGUE 2021 - 2022 CARGO CONNECT

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is the Corals mission model from the World Robot Olympiad 2023 Elementary competition in 3D assembly instructions.

This is a pinless attachment for a LEGO Education SPIKE Prime robot that uses the Ultrasonic sensor. The attachment could be placed on top of the robot. As it is pinless, it is easy to quickly place and remove it.