This attachment is accomplishing three missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 8 - Rolling camera, mission 12 - Virtual reality artist and mission 13 - Craft creator.
These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.
These are 3D Building Instructions for M15 Research Vessel mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Research Vessel for additional building possibilities.
Прост робот за следване на линия. Сеон може да бъде програмиран да следва линия, но конструкцията му не позволява просто патешко следване на линия, а изисква използването на по-усъвършенстван метод.
This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
3D building instructions for the watch television LEGO mission model from the FLL 2022 competition
Инструкции за LEGO SPIKE робот, който наричаме петминутен, понеже може да се построи за пет минути.
Името на робота идва от унгарската дума megállíthatatlan, която означава неудържим.
Този робот е направен да се движи безкрайно в стаята. Сензорът за сила, в комбинация с щита отпред, му помагат да засече, когато се е блъснал с нещо и да завие! Можете ли да го направите безспирен?
First version of a reusable gear attachment. By following the same principle for assembling the attachments you can change the direction of the gear wheels and build powerful attachments that could accomplish missions in any direction.
Attachment for grabbing loops build from LEGO MINDSTORMS Robot Inventor 51515 set. We use this robot attachment to accomplish missions with loops at FIRST LEGO League. Well, we use the principle, that is what's important. Check out the attachment and the course to understand the principle of grabbing loops.
This is an pinless robot attachment designed for taking loops. It's built with LEGO MINDSTORMS Robot Inventor parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachments that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
One pumpkin spice latte coming right up! This robot is made to serve the best drinks in the whole continent! It is one of the simpler robots that can be made with the LEGO SPIKE Prime set and it uses two medium motors to move around. The coolest part about the robot is the cup holder where a "cup" can be attached or removed. Bottoms up!
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
Магазино(Magazzino) от италиански означава склад.
Този робот е направен да дърпа и държи обекти. Той използва два големи мотора за да се движи и един среден за хващача. Хващачът е отпред на робота и се състои от две "ръце", които са свързани към две зъбни колела, свързани със средния мотор, което им позволява да се движат като хващач.
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
