Building Instructions -

• VEX IQ

VEX IQ Steering Rover Car with remote control.

Vex IQ robot base which could be used with different attachments. The gravity center of this robot is in the backside and it has a lot of space in front for attachments.

VEX IQ version of an Easy Bot. It's simple and appropriate for classes of students. 

This robot was designed for the VEX IQ Challenge 2019-2020. It could push four hubs simultaneously. It can carry one. And it call pull itself on the bar at the end of the run. We've used four omni wheels of which the two at the back are the driving wheels.

Demo program can be found at Program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.

This is an 8 bar lifting robot. Way should I build this instead of Roberto bot you ask? Because it is... well... it lift thing straight up, it lift 'em higher, it's more beautiful than Roberto and is more bad ass looking than 4 bar lifting mechanism. OOoohhh, and one more thing it may use the same program as Roberto Bot With Four Bars Lifting Mechanism.

The program si at programs/hb5rj8-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit.

VEX IQ robot base for Cube Collector 2

This is a small VEX IQ truck that have one and only one reason to exist. The reason is to teach students to drive by practising diving with it.There is nothing that makes the Little Truckie happier than driving.

The programs for controling Truckie are at:

Truckie - "Easy" To Drive VEX IQ Program for Modkit. Left stick steers. Right stick moves

Truckie - "Hard" To Drive VEX IQ Program for Modkit. One stick for move and steer

This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability. It also have low center of the mass which makes it more stable for higher attachments.

The program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit

This are building instructions for a second mechanism for collecting cubes. This mechanism is designed for VEX Robot Base 1 and can be used for solving VEX IQ Challenge Highrise 2014-2015.

Roberto is one handed robot with four bars mehanizm. He is more durable then Pesho.

This robot is based on Roberto Chassis.

Program for this robot available here.

Simple VEX IQ competition base with a lot of space for attachments and gravity center in the backside of the robot.

A very simple base of the robot that could be used for adding attachments.

This is a simple chassis that uses two motors to control the robot and two omni wheels at the back for greater maneuverability.

The program for this chassis is at programs/c0oq4l-pesho-bot-chassis-controls-with-modkit

This is the Little Truckie, but upgraded with an arm so it can teach you to be a good driver with lager number of controls. Now you can drive it and lift things at the same time.

The programs for controlling Truckie are at:

Truckie - Easy To Drive VEX IQ Program for Modkit

Truckie Hard To Drive VEX IQ Program for Modkit

Advanced Truckie - Easy To Drive Advanced VEX IQ Program for Modkit

It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.

This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.

It's the second version of the Robot Base 4, but with rotated inside motor.

Program for this robot is at programs/uxgw6b-roberto-bot-chassis-controls-with-modkit

Building instructions for Tower Trunk. The trunk is designed to store cubes and then drop them on a desired spot. It can be used alongside Cube Collector 2 as an attachment for VEX Robot Base 1.

This is the good not so old Pesho Bot Chassis with a "two bars" lifting mechanism and a hand. It can be build with any set. Only the omni-wheels are extra, but what is a good robot without an omni-wheels.

The program for this robot is at programs/a6hrcz-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit