Building Instructions

A very simple base of the robot that could be used for adding attachments.

Background

Soon after a launch, rocket engines often separate away from spacecraft by design, but that’s long before the spacecraft leaves the pull of gravity. So why doesn’t the spacecraft fall back to earth?

Mission

The robot needs to impact the strike pad hard enough to keep the spacecraft from dropping back down.

Scores

• Get the spacecraft to go so fast and high that it stays up, by pressing/hitting the strike pad: 24
• Possible scores: 0, 24

Scoring Requirements

• The result must be visible at the end of the match.
• Activate the spacecraft by pressing/hitting the strike pad. > Only allowed method. Must be observed by the referee.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for the Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Basketball mission and it is the second attachment for this mission. The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

We've deprecated it because we build a better attachment

This robot may look a bit unusual. Can you guess why? The motors are placed in opposite directions - one faces forward, while the other faces backward. This means that if both motors are set to move forward, the robot will spin in place!

To make the robot move forward, one motor must turn forward while the other turns backward.

The purpose of this robot is to show that motors can be placed in different ways. They do not always face the same direction, and this must be taken into account when programming.

Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.

 

This is a Material supplementing the Instructors training course. Attached is our methodology for working with students. If you spend some time to read it beforehand, we can discuss only the questions that you have, instead of listening to the whole thing. That will be a more efficient usage of our time in the training. 

This is a disk image containing a Raspbian OS. The image is modified and set up specifically for the Perfect course. It contains all the needed files, libraries and additional tools that we would use in the course. The file is quite large so be prepared to wait some time while downloading.

Checksum: 4d85292f49a9350fcef9f2eb8fd86b77f1c6bd65ce1344848de3e201c9e1d20d

These are 3D Building Instructions for M05 Shark mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Shark for additional building possibilities.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

These are 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

The robot's name comes from the Hungarian word megállíthatatlan which means "unstoppable."

This robot is made to go infinitely around the room. The force sensor in front of it, combined with the shield, helps it detect whenever it has collided with something and then turn! Can you make it unstoppable?

We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.

These are instructions on how to build the:

• Tree

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is a print ready vinyl mat that contains 7 barcodes and 15 products. The barcodes are not symmetrical and can yield different product result depending from the scanning direction - left to right or right to left. This mat is used in lesson 6 of level 3.5 Measurement tools.

 

This is the Little Truckie, but upgraded with an arm so it can teach you to be a good driver with lager number of controls. Now you can drive it and lift things at the same time.

The programs for controlling Truckie are at:

Truckie - Easy To Drive VEX IQ Program for Modkit

Truckie Hard To Drive VEX IQ Program for Modkit

Advanced Truckie - Easy To Drive Advanced VEX IQ Program for Modkit

This is the joystick for controlling Real Steel LEGO Boxing Robot. We use the bluetooth connection for communication between the two bricks. 

It's a VEX IQ robot base with all VEX IQ Sensors. The robot has 1 x Gyro, 1 x Ultrasonic, 1x Color Sensor, 2 x Toch Sensors, 1 x Touch Led Sensor.