This is a 10 out of 10 tutorial where we deliver and drop precisely to complete a FIRST LEGO League 2021-2022 Cargo Connect mission. We reuse the same attachment as in other missions to demonstrate a reusable attachment.
The dance mission is one of the most straightforward and easy missions to complete at the FIRST LEGO League competitions. This one is from RePLAY competition. The goal is to reach a specific place on the field and dance with the robot. You will see how we dance and have fun with our robot. Never forget to have fun during the competitions.
Energy storage mission from FIRST LEGO League 2022-2023 is again a two parts mission where we have to drop a few energy units in the mission model, but we also have to pull part of the mission model. In this video tutorial we demonstrate how the Chain Monster LEGO box robot accomplishes this with a multi purpose attachment for box robots.
In this video tutorial, we demonstrate a reusable attachment. It is the same attachment we've previously used for two other missions. Sometimes we can build such attachments - one attachment that can complete several missions. Yes, the mission is similar - it is Load Cargo, but we are loading the cargo in different places on the field, and that's important.
In this tutorial we demonstrate how accurate the robot is when we are moving it slow vs when moving it fast. The point of the tutorial is to show that moving slowly is generally much more accurate. It is not accurate enough for a FIRST LEGO League competition, but if you have to move without the use of the sensors you can at least move slow.
In this video tutorial we accomplish a robotics competition mission model and we accomplish it 10 out of 10 times. The mission is Pull-up from the FIRST LEGO League 2020 RePLAY competition. The goal of the mission is to pull up the robot on the bar. The robot must not be touching the ground.
In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run
In this video tutorial, we focus on M10 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster, a LEGO Education SPIKE Prime robot, equipped with a three-axle attachment. The mission's objective is to lift the sound mixer sliders and position them precisely to score the maximum points. While the mission may seem challenging at first, once you understand how the attachment works and how to properly connect it to the robot, it becomes a breeze. Let’s give it a try!
This M12 Water reservoir from FIRST LEGO League 2022-2023 is accomplish in two part with the Chain Monster box robot. The first part is in a previous tutorial. This is the second part where we collect the third water unit. We use a passive attachment to collect this unit.
In this video tutorial we accomplish the Innovation project mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to build a new construction on the day of the competition and to complete a mission with this new construction. There are a couple of spare parts in the FLL set and building the construction for the innovation project was quite fun.
In this video tutorial, we focus on accomplishing M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the MiniBox, a LEGO Education SPIKE Prime box robot equipped with several attachments. The goal of the robot is to deliver the LEGO mini figures to their designated place and then press down the M03 platform to trigger the immersive experience for the viewer in the mission model.
In this video tutorial we demonstrate how to accomplish M03, M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster which is a LEGO Education SPIKE Prime robot equipped with two pinless active attachments.
The side attachment uses a gear mechanism to press down a lever and drop the mini figures with loops. It has a more advanced construction with a special lock to prevent the attachment from rotating when mounting it on the robot. Pay attention that the lock should be removed before the start of the run.
We use a special construction to help us align the robot in the base to ensure the robot starts from the same place every time.
This video tutorial is about accomplishing the Pull-Up bar mission from the FIRST LEGO League 2020 RePlay robotics competition. The goal of the mission is to move with the robot and pull the robot up. With this video tutorial you will learn how to build such attachments and how missions that are about lifting the whole robot could be accomplished. The attachment also makes a very good use of rubber bands.
This video tutorial demonstrates an attachment that flips a mission model. The mission model is attached to the field, but it contains a lever. This lever must be flipped from one side to the other. There is a switch. We use a pinless active attachment with gear wheels, and you can see how this works in the tutorial. There is no use of sensors as we don't need them. We will leave the alignment and positioning for some other tutorials.
In this LEGO robotics video tutorial we accomplish Weight Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. The goal of the competition is to lift a weight. The mission model resembles a weight machine, and is actually a lever. There are three different levels and you earn different points depending on the level. The attachment for this mission model uses rubber bands and lifts the mission model.
In this video tutorial, we demonstrate how to complete M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We use the MiniBox, a robot built from LEGO Education SPIKE Prime.
To complete the missions, the robot rotates the chicken to trigger the M12 Virtual Reality Artist, pushes the M13 Craft Creator to release the creation, and collects the M15 LEGO minifigure. After completing all tasks, the robot detaches its attachment and leaves it on the field for a faster change at the base. Let's take a look!
The Cell Phone mission is part of the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to flip the Cell Phone. In this video tutorial we use a LEGO Education SPIKE Prime robot to flip the cell phone. This mission is similar to the FLL 2017: How to accomplish Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018.
This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
In this video tutorial we accomplish the Unused Capacity mission by pushing the mission model outside of the field in the area where we are allowed to touch the robot. We deliver the mission model to the side of the field. Before delivering, we must of course reach it and that's not always easy.
In this video tutorial we accomplish the FIRST LEGO League 2022-2023 SUPER POWERED mission called M04 Solar Farm. We use the chain monster box robot along with a passive attachment that helps us collect 3 of the energy units. The interesting thing about the mission is the collection of the units, of course, but also the way this robot manoeuvres when there is not enough space. It aligns to the lines, it uses the color and motion sensors. Really advance way to align the robot.
In this video tutorial we pull the Smart grid mission model from the FIRST LEGO League 2022-2023 competition. The goal is to lift the hand to connect with the hand on the other team field. We do this my pulling on the attachment and we reuse the same "hand" that we have for collecting.
In this video tutorial, we demonstrate the accomplishment of three missions in a single run. The competition is FIRST LEGO League 2022/2023 SUPERPOWERED and the missions involve carrying and delivering a dinosaur toy, delivering energy units, and delivering the innovation project model.
This is a video tutorial where we focus on M14 and M15 of FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. Here, we demonstrate the precision of the attachment. Try to build the attachment and accomplish the missions.
In this video tutorial, we demonstrate how to gently push an object to accomplish the mission. "Gently" means that we are pushing but not with force. If we push using force, the mission model will fall, and we will not accomplish the mission. We use LEGO Education SPIKE Prime and the Ultrasonic Sensor.
This FIRST LEGO League robotics video tutorial is about the Treadmill mission and how it could be accomplished. The mission is from FLL 2020 RePlay competition. Almost every year there is a mission of this type where the robot must spend a lot of time with the mission model in order to turn or lift something. These are quite interesting and challenging missions.
In this video tutorial, we demonstrate how Kufar accomplishes M03, M15, M11, and M04 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is our LEGO Education SPIKE Prime out-of-box robot that uses a color sensor to detect the attachment frame and the respective program.
In this run, Kufar executes several complex moves while navigating the mat. At the front, the robot features a scissor-like attachment triggered by rubber bands. At the back, there is a mechanism that carries a couple of mini-figures and the M04 art piece. Carefully study the attachment, and don't hesitate to upgrade it if you like!
In this video tutorial, we take a closer look at completing M04, M05, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the MiniBox, a LEGO Education SPIKE Prime box robot equipped with several attachments. The robot needs to accurately drop the mini-figures and the Masterpiece mission model, then rotate the Augmented Reality Statue to reveal its experience—efficiently and predictably.