Video tutorials -

• Scratch

-

• Lift

-

• LEGO Education SPIKE Prime

In this video tutorial, we demonstrate a full run of all the missions in the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition, using the Minibox - a LEGO Education SPIKE Prime robot.

These kinds of runs are extremely useful for teams looking to see how they can tackle the entire range of missions, pushing their accuracy, speed, and self-control to the limit.

In this video tutorial, we demonstrate a full run of all missions without pausing the recording. The competition is the FIRST LEGO League 2023-2024 MASTERPIECE Challenge, and the robot is the Chain Monster - a LEGO Education SPIKE Prime robot.

These kinds of runs are extremely useful for team preparation right before the competition, as they help team members improve their accuracy, speed, and self-control.

In this video tutorial, we demonstrate how to accomplish M11 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster - a LEGO Education SPIKE Prime robot equipped with gears and a pinless attachment that will rotate the M11 Light Show.

This is a 10 out of 10 tutorial in which the Minibox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. One run takes less than 5 seconds as the mission model is very close to the base, which is why the video is not that long.

The Minibox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. Let's see the consistency of this robot!

This video tutorial shows how the Minibox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The Minibox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!

This is a 10 out of 10 video tutorial, in which we demonstrate how Kufar, a LEGO Education SPIKE Prime out-of-box robot, accomplishes M03, M15, M11, and M04 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season ten times in a row!

As we said in the previous tutorial, Kufar executes several complex moves while navigating the mat. At the front, the robot features a scissor-like attachment triggered by rubber bands. At the back, there is a mechanism that carries a couple of mini-figures and the M04 art piece. Enjoy!

In this video tutorial, we demonstrate how Kufar accomplishes M03, M15, M11, and M04 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is our LEGO Education SPIKE Prime out-of-box robot that uses a color sensor to detect the attachment frame and the respective program.

In this run, Kufar executes several complex moves while navigating the mat. At the front, the robot features a scissor-like attachment triggered by rubber bands. At the back, there is a mechanism that carries a couple of mini-figures and the M04 art piece. Carefully study the attachment, and don't hesitate to upgrade it if you like!

This is a 10 out of 10 tutorial in which the Minibox robot accomplishes the M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The Minibox is a LEGO Education SPIKE Prime box robot that uses detachable attachments.

In this run, the robot performs five actions: it collects the M15 minifigure and throws it backward, rotates the chicken for M12, and then pushes and pulls the M13 Craft Creator mission model. All of these actions are completed in under 15 seconds!

In this video tutorial, we demonstrate how to complete M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We use the Minibox, a robot built from LEGO Education SPIKE Prime.

To complete the missions, the robot rotates the chicken to trigger the M12 Virtual Reality Artist, pushes the M13 Craft Creator to release the creation, and collects the M15 LEGO minifigure. After completing all tasks, the robot detaches its attachment and leaves it on the field for a faster change at the base. Let's take a look!

This is a 10 out of 10 tutorial demonstrating the consistency with which the Kufar robot accomplishes M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is an out-of-the-box LEGO Education SPIKE Prime robot, meaning you don’t need to connect attachments—just slide the brick into the attachment frames.

In this run, the robot collects the mini-figures using a rubber band mechanism, rotates the chicken with a gear mechanism, and pushes and pulls the M13 Craft Creator mission model.

In this video tutorial, we focus on M10 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster, a LEGO Education SPIKE Prime robot, equipped with a three-axle attachment. The mission's objective is to lift the sound mixer sliders and position them precisely to score the maximum points. While the mission may seem challenging at first, once you understand how the attachment works and how to properly connect it to the robot, it becomes a breeze. Let’s give it a try!

In this video tutorial we focus on accomplishing a part of M08 of FIRST LEGO League 2023-2024 MASTERPIECE season. The mission is to lift and unlock the lever to make room for rolling the camera. It's a simple action but requires the robot to be stable and accurate. We use the Chain Monster - a powerful LEGO Education SPIKE Prime robot.

In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.

In this video tutorial the Chain Monster box robot accomplishes a mission that requires two actions. We should lift up (lever) and push almost at the same time on the mission model for it to release the batteries. These mission model is from the FIRST LEGO League 2022-2023 SUPER POWERED competition.

In this video tutorial with LEGO SPIKE Prime we accomplish M02 Oil Platform from the FIRST LEGO League 2022-2023 SUPER POWERED robotics competition. We use the Kriket box robot and an attachment that allows us to lift. The actions of the mission is between Lift and Push, be because it is vertical.. we choose Lift. Checkout the full tutorial for all the 3 missions in a single run.

This video tutorials shows how we accomplish a specific mission model from FIRST LEGO League 2022-2023 SUPER POWERED robotics competition. The mission is called - M11 Hydroelectic Dam and in the tutorial we accomplish part of it. In other tutorials when we get back with the SPIKE Kriket box robot we have more time to accomplish the rest of the missions.

This is a programming video tutorials. It uses LEGO Education Word Blocks which is the scratch version. We enter into details of how to accomplish missions in a tight spot, how to align the robot and how to make it repeatable.

In this LEGO video tutorial we accomplish 3 missions with the Kriket box robot. A number of actions are performed like Lever, Lift, Drop, Pull, Align. This tutorials shows how to accomplish missions models that are closely positioned next to each other.

This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of a configurable attachment. The attachment is designed to accomplish the FIRST LEGO League 2021-2022 Cargo Connect mission model called Sorting Center. The mission model has 3 cargo objects that could be placed in a different way. The attachment is configurable and before the run we configure it for the specific way in which the mission model is set up before the start of the round.

In this video tutorial, we demonstrate a configurable attachment used for accomplishing a FIRST LEGO League 2021-2022 Cargo Connect mission called Sorting Center. The mission model has three cargo objects that are placed randomly. The attachment is configured before the run based on the configuration of the cargo objects. This attachment is also very powerful as it aligns and auto-corrects the errors that the robot is making by squaring the robot.

In this video tutorial we accomplish the basketball mission from the FIRST LEGO League 2020 reply competition. We use the LEGO Education SPIKE Prime competition robot called Gazon. You will learn the principles of accomplishing a mission of two parts - put the ball in the basket and lift the basket.

In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.

In this LEGO robotics video tutorial we accomplish Weight Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. The goal of the competition is to lift a weight. The mission model resembles a weight machine, and is actually a lever. There are three different levels and you earn different points depending on the level. The attachment for this mission model uses rubber bands and lifts the mission model.

This is a true 10 out of 10 video tutorial. The robot accomplishes the Weight Machine mission from the FIRST LEGO League 2021 RePlay competition every single time. The attachment demonstrate a mechanism that performs and is stable on every try