This module is meant to be used in EV3 Kinesthetic and Memory Game and is attached to the base of the robot. This is the simplest module for constructing and programming. At the bottom, a channel is left for the cable to pass through.
These are building instructions for LEGO WeDo 2.0 Forklift.
These are building instructions for an attachment accomplishing the FIRST LEGO League 2017-2018 Slingshot mission. The based of the robot is LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro
Instructions for building a LEGO truck. We use a medium motor for steering and a large motor for driving one of the rear wheels.
For the FIRST LEGO League 2016-2017 Animal Allies we prepared an attachment for lifting the robot. The idea of the attachment is to show how you could lift the whole robot with a system of gear wheels, levers, and scissors constructions.
Built mainly from LEGO Mindstorms EV3 parts but could probably be constructed from NXT sets.
Fly with us. These are building instructions for a Helicopter, built with LEGO WeDo 2.0 set.
This is the third version of the LEGO Mindstorms Grabber. This time we use a LEGO EV3 Medium motor and worm gear to make the two levers move smoothly and symmetrically.
Accomplish three FIRST LEGO League missions at once. This is an interesting Large multi-purpose FLL attachment for a box robot that could be used to accomplish a number of missions with a single exit of the field base.
Building instructions for this LEGO Mindstorms EV3 robot used in the World Robotics Olympiad Junior competition
This is a simple LEGO Gear System with a ration of 1:5. When the large wheel rotates 1 time the small wheel will rotate 5 times.
These are building instructions for a 4x4 LEGO WeDo 2.0 vehicle
Building instructions for a LEGO Mindstorms EV3 robot where the motors are placed in an unusual manner. They are vertically placed on the sides. This robot construction base is very convenient for a quick and interesting robot on which you could build.
This attachment is meant to be built on the robot Francesco 2. When the red connector for the transmission connects the two axles for the rear gear wheels, the differential locks and the motor starts evenly transferring its power to both wheels.
When the red connector for the transmission is pushed to the side, the differential unlocks and once again transfers its power to the wheel with least resistance.
You can see empty beams hovering over this attachment. They are there so you can attach a lever construction over it, to help with the locking and unlocking of the differential. Similar leaver can be seen in the robot Catapult.
Gen comes from Gendema, a bulgarian late 80s rock band, popular with its song about pedalos.
The robot uses two EV3 Large motors to move, but instead of wheels it uses four-legged paddles, attached to the motors. This makes it look like a pedalo. Additionally it slides on the ground much like a real pedalo on the water.
Because of the strange mechanism of movement, the robot has a gyro sensor to help it keep a straight line.
LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use.
This is a robot attachment that could be used to push/pull object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for pushing and pulling that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This LEGO Mindstorms robot base is small, compact and packed in a very small volume. The goal of this constructions is to be used as a base and to show yet another way to experiment with adding motors to the brick.
Building instructions for a safe mechanism. The medium motor can be used for dialing in the key lock. The brick buttons can also be used for a pin code input.
One of the large motors unlocks the latch, the other one opens up the lid of the safe.
These are building instruction for a working automatic catapult with a motor and a touch sensor.
Tohuru, from Maori, means owl.
Tohuru is a SPIKE Prime robot, that holds onto an edge and looks at the nearest object! It uses two medium motors to grip an edge between two wheels. In addition it has a head made out of an ultrasonic sensor, attached to a large motor, which allows it to turn 360 degrees! And most importantly, it looks like an Owl!