Video tutorials -

• LEGO Education SPIKE Prime

Raw footage of how to accomplish the mission. A more polished version might be uploaded soon.

This tutorial demonstrates how a robot could align to a black line. The code for the program is available in the course. Aligning to black lines is popular at robotics competitions like FIRST LEGO League as it is the primary way to know where you are on the field and to develop a program that is reproducible. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

There are some fundamental rules that we advise you to follow while organizing this course with students. Let's look at them.

Taking/Grabbing loops is one of the most common mission types at robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial is about an attachment that grabs the loop. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

Reusable attachments are our favorite. They could be used in a number of different scenarios especially on robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial shows how this reusable attachment could accomplish a mission for lifting a lever. It uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

This video tutorial demonstrates the accuracy and consistency of the robot behavior when we use only the blocks for moving the robot without any sensor. Spoiler alert - the robot is not consistent and it is not accurate.

In this video tutorial we run the robot for 10 times and we demonstrate the consistency of the robot behavior with our advanced algorithm for smooth line following. What you will get from it is an understanding and demonstration of what can you expect from the robot.

This tutorial shows how quick pinless attachment collects loops. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

In this video tutorial we demonstrate the classic algorithm for following a line with robots. It is widely used in FIRST LEGO League competition and could be applied to LEGO Education SPIKE Prime and to other robots also. The algorithm follows a line by moving to the left and to the right and trying to stay at the edge of a black line.

We will cover the names and the basic usage of the parts in our typical robot.

Now that you have tried and solved a challenge involving a series of instructions, we would like to share a few best practices.

This quick pinless attachment is designed for collecting parts by pushing them. It shows the principle of putting a robot of an attachment in a very fast manner. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

One of the simplest tricks in the game - move, complete the mission and leave the attachment with the mission model. You don't have to return the attachment to the base. On some competitions there might be penalties, but it might be worth it, as you save time to complete another mission. This works especially well with large attachments.. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

When organizing this course, the behavior expectations should be set at the very beginning of the course.

What a teacher must look out for, while students are building a robot from instructions.

This videos tutorials demonstrated the robot accuracy in 10 runs one after the other. 5 of them are with the robot moving slow and 5 are with the robot moving fast. See for your self what is the accuracy achieved only with the move blocks of the robot.

After downloading the SPIKE programming software, you’ll need to connect to your hub in order to load a program to your robot. Let’s take a look at how you can do that!

This is one of the last tutorials in the LEGO Education SPIKE Prime programming for Competitions course and it demonstrates what we've all been waiting for - how to reach a mission model from base in a reliable and consistent way when the mission model is on the other end of the field. Naturally what we use are all the different concepts that we've learned in the course and the tutorial is more advanced than the other so if anything is not clear take a look also at the different tutorials an concepts in the course.

In this video tutorial we take a look at the consistency of a robot that uses acceleration and deceleration to turn precisely. We use the motion sensor. In 10 consecutive runs we demonstrate what could you expect from the robot when it comes to consistency.

In this video tutorial we focus on accomplishing a part of M08 of FIRST LEGO League 2023-2024 MASTERPIECE season. The mission is to lift and unlock the lever to make room for rolling the camera. It's a simple action but requires the robot to be stable and accurate. We use the Chain Monster - a powerful LEGO Education SPIKE Prime robot.

This tutorial demonstrates how a LEGO Education SPIKE Prime robot could stop when it reaches a wall. FIRST LEGO League competitions are held on tables that have border and it is sometimes useful to use the Ultrasonic sensor to detect the border and stop close to the border. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.

This video tutorial focuses on M01, M02, and M14 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. The Chain Monster box robot (a LEGO Education SPIKE Prime robot) uses a single attachment to accomplish all three missions in sequence. First, it pushes the mission model, then presses down the next one, and finally collects some mini-figures.

Tips and common mistakes when connecting two beams together

The Load Cargo mission model could be accomplished by loading a cargo in a number of mission models on the FIRST LEGO League 2021-2022 Cargo Connect field. In this video tutorial, we load the cargo on the platooning trucks. In the previous one, we load it on the trains.

In this video tutorial we show how you can build robots that position on the field consistently and reliably by following and line and then aligning to a line. We also demonstrate the concept of "double align" which is quite powerful and even if there were some mistakes they will be handled.

In this video tutorial with LEGO SPIKE Prime we accomplish M02 Oil Platform from the FIRST LEGO League 2022-2023 SUPER POWERED robotics competition. We use the Kriket box robot and an attachment that allows us to lift. The actions of the mission is between Lift and Push, be because it is vertical.. we choose Lift. Checkout the full tutorial for all the 3 missions in a single run.

This video tutorials shows how we accomplish a specific mission model from FIRST LEGO League 2022-2023 SUPER POWERED robotics competition. The mission is called - M11 Hydroelectic Dam and in the tutorial we accomplish part of it. In other tutorials when we get back with the SPIKE Kriket box robot we have more time to accomplish the rest of the missions.