10 out of 10 video tutorial for Rowing Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. In the tutorial you will see how to accomplish the mission almost every time. This is a mission that requires a lot of precision so naturally it is difficult to accomplish it every time, but with the right attachment for the LEGO Education SPIKE Prime robot it is achievable
This video tutorial is about how to accomplish the Rowing Machine mission in the FIRST LEGO League 2021 RePlay robotics competition. The Rowing machine mission model consists of a wheel that should be pushed or pulled and will lift two other wheels, just like a real Rowing Machine. What you will get from this tutorial is an example of how to build a robot that is very precise. The attachment is simple, but the programming is more difficult. You must first align to a line, and then to a wall and then make a precise turn with the robot to accomplish the mission with our attachment.
In this video tutorial, the MiniBox robot accomplishes M01 3D Cinema of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The mission model is located close to the base, and the robot uses a detachable attachment to push and activate it.
The MiniBox is a LEGO Education SPIKE Prime box robot, designed to use detachable attachments, which helps make the runs faster. Let’s take a look!
This is a 10 out of 10 video tutorial that is different from the rest. We demonstrate how difficult it is to accomplish a mission and we use an attachment that is working 5 out of 10 times. Our goal with the video is to give everybody the understanding that taking your time to accomplish a mission is the right thing. Most of the 10 out of 10 tutorials at FLLCasts contain solutions and approaches that are working in a repeatable fashion. Not this one. See how difficult it is to accomplish a mission and that we also make mistakes.
In this FIRST LEGO League video tutorial we accomplish the Step Counter mission from the FLL 2020 RePlay mission. The mission model is quite interesting as it can not be pushed fast and it can not be pushed slowly, because it will jam. The robot must push it with the right speed and this proves to be difficult.
Step Counter mission model is one of the more interesting mission models at the FIRST LEGO League 2020 RePlay competition. There is a locking mechanism that does not allow us to just push on the mission model to accomplish it, you must push it really slow and to do this 10 out of 10 times it is challenging.
In this video tutorial, the MiniBox box robot accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot delivers the LEGO minifigure to its designated place and then pushes the M08 camera down the track to shoot the movie scene.
This is a 10 out of 10 tutorial on accomplishing M04, M05, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The robot needs to accurately drop the mini-figures and the Masterpiece mission model, then rotate the Augmented Reality Statue to reveal its experience—efficiently and predictably, 10 times in a row. The robot is the MiniBox, a LEGO Education SPIKE Prime box robot with several attachments.
In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.
10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
This is a 10 runs tutorial that demonstrates how the accuracy of the robot improves when we use slow acceleration vs fast or default acceleration. Note that the improvement is small. This is not an accurate and consistent robot. No. This is a robot that is all but accurate or consistent. It does not use sensors and you should use sensors. But it is a teaching/demonstration moment for everybody to seen what is it that you can expect if you don't use sensors.
Similar to the tutorial for the LEGO Education SPIKE Prime this tutorial again accomplishes the cell phone mission. The mission is to flip the phone and is part of the FIRST LEGO League 2020 RePlay competition.
In this video tutorial we accomplish the Boccia mission from the FIRST LEGO League 2020 RePlay competition. We use LEGO Mindstorms Robot Inventor robot. In this mission we use an attachment that does three things in the same time - align, push one lever and drop a couple of boxes in a target. It is a complex attachment and it is worth the watch.
In this video tutorial, the MiniBox box robot accomplishes M14 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime robot. In this run, the robot delivers the LEGO minifigures to their designated places.
In this video tutorial, the MiniBox robot accomplishes M08 and M09 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
The MiniBox, a LEGO Education SPIKE Prime box robot, uses a detachable attachment to release the camera down the track for M08 Rolling Camera. Then, with a slight turn, it pulls the M09 Movie Set boat model and positions it in its designated spot. Let's take a look!
In this 10 out of 10 tutorial, we accomplish the Platooning Trucks from FIRST LEGO League (FLL) 2021-2022. The goal of the mission is to connect the trucks to each other and both of them to the bridge. The attachment and the robot pushes the trucks and we do it 10 times to see the consistency and reliability of the robot.
In this video tutorial, we demonstrate a configurable attachment used for accomplishing a FIRST LEGO League 2021-2022 Cargo Connect mission called Sorting Center. The mission model has three cargo objects that are placed randomly. The attachment is configured before the run based on the configuration of the cargo objects. This attachment is also very powerful as it aligns and auto-corrects the errors that the robot is making by squaring the robot.
On every FIRST LEGO League competition and generally robotics competitions with LEGO robots, we build attachments to accomplish missions and we must accomplish the missions in a limited amount of time. Most of the time we can not accomplish the missions with a single attachment and we have to change attachments. This is where building robot attachments that are easy to remove really makes sense. In this tutorial we discuss some of the things that should be considered in the building Easy to Detach modules and attachments
In this video tutorial we discuss probably the most useful principle that we've found for FIRST LEGO League competitions and this is how to align to a line with two color sensors. We use the LEGO Mindstorms Robot Inventor for a quick demonstration of the principle. In the LEGO Mindstorms Robot Inventor Programming course we enter into more details of how exactly we program the sensors. The current tutorial demonstrates the use of such a program and makes clear why this could be very useful and is a must for any well prepared team and wants to achieve a good score on the competition.
The goal of the Innovation project mission is probably to give everybody an easy win on the competition. A mission that does not require an attachment or a complex program and it the same time is quite interesting. In this video tutorial you will see our robot and our innovation project construction, along with how we complete the mission. Hope you like them!
This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.
This is a true 10 out of 10 video tutorial. The robot accomplishes the Weight Machine mission from the FIRST LEGO League 2021 RePlay competition every single time. The attachment demonstrate a mechanism that performs and is stable on every try
This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.
This video tutorial focuses on accomplishing M02 Shark, collecting the trident for M14 Sample Collection, and collecting a Krill for M12 Feed the Whale of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). In this series of test runs, our goal is to achieve 10 out of 10 successful attempts, meaning the robot completes all three missions flawlessly in every trial.
The robot uses a pinless attachment with locking beams for stability, enabling it to push the shark into its habitat, trigger a drop wall to catch the Krill, and lower a motorized arm with rubber parts to grab the Trident. This efficient approach ensures consistent results across the attempts while maintaining stability and precision throughout the runs. You can watch the full explaining tutorial here.
This is the first video tutorial from our course on LEGO MINDSTORMS Robot Inventor programming. In this tutorial we will start with how do we move without sensors. We will demonstrate a simple program. Our hope with this tutorial is that you will see why moving without sensors is a bad approach.
10 out of 10 for the innovation project mission is quite interesting - move forward, return, move forward, return. In the tutorial you will see how we accomplish the mission every team and how the program is repeatable
In this video tutorial we use an active attachment with a gears, built only form LEGO Mindstorms Robot Inventor parts, to accomplish the FIRST LEGO League 2020 Treadmill mission. The goal of the mission is to rotate the mission model for a couple of seconds so that a pointer makes a half circle rotation. What you will learn is a good principle to approach such missions.