Задачи за йо-йо предизвикателството
Специално предизвикателство за програмиране на робота, така че да се движи като йо-йо.
- #401
- 15 Mar 2017
Специално предизвикателство за програмиране на робота, така че да се движи като йо-йо.
Turning with the Gyro Sensor on a specified angle and stopping there have never been easy. It is not going to get any better. However, this is not a problem of the Gyro sensor. The problem is in the way we develop our programs.
In Episode 58 we introduced you to an LEGO Mindstorms EV3 Modular robot. Mic Lowne wrote to us and had that robot remade, because it used too many blue lego pins and could not be build using one EV3 kit.
Starting with the World Robotics Olympiad 2014 Junior-High challenge we first catch the object on our path. We discuss a good mechanism for catching and lifting balls that can do two movements with one motor.
There are number of settings in a Move block and now we will focus on the rotations setting
The third robot has the brick and motors placed vertically. This is quite unusual and difficult, but the construction is very powerful because it saves space.
Use the color sensor to count the lines and stop on the third line. We do not use the wait block for this.
Tasks for introduction on building robots.
90-градусовото завъртане на робота е различно от 90-градусовото завъртане на мотора!
Sometimes the way an axle is placed is just not suitable for a certain attachment and you should transfer the motion to another axle a few LEGO units above the current.
How far will the robot move for one second?
Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor
Note: This robot contains wheels that are from the NXT set.
These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments.
Инструкции за построяване на робота EasyBotEV3. Този ЛЕГО робот е подходящ за ученици по роботика и е един от първите роботи, които строим. Обикновено неопитни ученици строят този робот за около 10-20 минути.
This modification of the box robot contains large wheels. It was specially requested by you and we have it .
Инструкции за построяване на робот, който прилича на шпионския бот, но има вериги вместо колела. Също като танк. Шпионски танк бот. Винаги е забавно да се работи с вериги, като може да използвате различни приставки и инструменти, за да удължите основата на шасито на робота.
Целта на тези инструкции е да ви помогнат да построите ЛЕГО Mindstorms EV3 робот без колела. Трябва вие сами да помислите как точно да поставите колелата. Какви колела бихте използвали отпред? Как ще построите третото колело? Ето тук има някои препоръки за това как да построите третото колело - 1, 2, 3, 4
Можете да добавите хващач към тази конструкция по инструкциите тук.
Искал ли си някога да видиш колко бързо се движат количките ти с дистанционно? Или да си направите състезание за скорост по трудно трасе с някое приятелче? Може да си намерил точният робот за теб!
Радърфорд е един висок надлез, който има радар в себе си. Можеш да видиш точно колко е бърз предмет, отиващ към него, и още много!
Geldautomaat произлиза от немския език и означава банкомат.
Това е последният робот от курсът 3.0, част от ЛЕГО програмата.
Използва сензор за допир, за да усети дали се опитваме да пъхнем карта в него. Когато разбере, средният мотор се задвижва и издърпва картата в кутийката. Там, минавайки през сензор за цвят, картата може да бъде разчетена.
Конструкция: дръжте картата вътре в канала на робота, докато строите, за да дава опора на частите, които надграждате. Ако не е вътре конструкцията ще се разпадне при строенето.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program