Improving FLL Robot Game. Teacher Note. Introduction to task for Lifting
How should an instructor use this course when working with students and a group of students in school
- #436
- 06 Mar 2017
Content for Construction
Improving FLL Robot Game. Task. Lift with a Rack
Build a rack and try to lift the robot with this rack.
- #449
- 05 May 2017
Multiple rubber bands attachment for Solving-FLL-Nature's-Fury. Part 2
In this second part we continue with the next few tasks from the FIRST LEGO League (FLL) 2013 competition. Using the same rubber band attachment we lift the house and collect a few of the humans and cargoes.
- #170
- 21 Nov 2015
Constructing BigDaddy Competition Robot (Part 3 - Front to Rear)
Based on your feedback we have decided to show you the live process of building a complex LEGO Mindstorms EV3 Competition robot without having the whole robot ready yet. We are continuing from part 2 where we finished the 'front' of the robot and now we will extend it so that we could also attach the rear part.
- #72
- 22 Feb 2015
Multiple rubber bands attachment for Solving-FLL-Nature's-Fury. Part 1
Accomplishing many tasks with a single attachment for the FIRST LEGO League (FLL) 2013 competition. The attachments are using many rubber bands. What is interesting is that it collects/lift/triggers many things at the same time. This is how you could save time and parts during a competition.
- #169
- 18 Nov 2015
Catapult built from LEGO Mindstorms EV3/NXT (Part 2 - Base)
In this second video lesson on catapults we improve the stability of the base of the robot. An important feature of the new base is that it is not bending. Use the same principle in all of your constructions to achieve better, stronger robots.
- #66
- 04 Jan 2015
Robot Design Ideas for Chassis with Mindstorms EV3. Base Chassis 3
The third robot has the brick and motors placed vertically. This is quite unusual and difficult, but the construction is very powerful because it saves space.
- #185
- 07 Feb 2016
Contain and release ping pong balls. WRO Elementary 2015. Part 2
Improving the construction for the World Robotics Olympiad missions. The improvement is in the position of the sensor and the size of the balls container.
- #137
- 12 Dec 2015
Pinless Rubber Band attachment for solving the Oven
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
- #156
- 19 Jul 2015
- 1
FTC PushBot Modified Robot for Collecting Balls with Plastic Plate
These are buliding instructions for the FTC robot and collecting attachments with it. We are doing small modifications of the push bot.
- #280
- 25 Jul 2017
- 5
Cube Collector Attachment for VEX Robot Base 5
This are the building instructions for a mechanism, collecting cubes. It is designed as an attachment for VEX Robot Base 5 and can be used to solve the VEX IQ Challenge High rise 2014-2015.
- #304
- 16 Jul 2017
ЛЕГО робот, който използва инерцията
При работата с роботи ЛЕГО Mindstorms EV3 се използва много физика и математика. Но обикновено е „трудно“ тези понятия да се включат директно по време на час, тъй като учениците идват, за да научат „нещо по-забавно“, а и понякога те са на различна възраст. Но инерцията е доста обща тема и е лесно да бъде обяснена на учениците, особено ако се използва робот.
Роботът се движи и спира. Какво ще се случи с товара, когато роботът спре? Съвсем естествено е товарът да продължи да се движи, като това е опасно. За колко време, каква ще бъде енергията? Всичко това са въпроси, които биха могли да се обсъдят, като се представи този робот.
Роботът не е напълно завършен, тъй като това трябва да направите вие, като изберете, какви колела ще използвате.
- #360
- 26 Dec 2017
Мотокар бот - ЛЕГО Mindstorms робот, който прилича на виличен повдигач
„Как да построим виличен повдигач, като използваме само зъбни колела и лостове без рейка“… Добре, трябва да признаем, че това е труден въпрос. Дори звучи трудно. Затова нека започнем с нещо лесно. Един ЛЕГО Mindstorms EV3 робот. Той повдига обекти във въздуха. Използва две зъбни колела, които работят заедно и се движат в различни посоки, като са перпендикулярни едно на друго… Това изречение започна отново да звучи трудно… Нека опитаме отново.
Следвайте инструкциите с тези 70+ стъпки и ще получите чудесен робот, като заедно с това ще научите лесен трик за използване на зъбни колела и промяна на посоката, в която те се въртят.
- #365
- 16 Jan 2018
EV3 Basic Course. Introduction to robot programming, construction and sensor use
This course is designed for students, mentors and teachers that are completely new to LEGO Mindstorms EV3 robots and would like to start using them to learn, in classes or at competitions. It is quite different from previously built resources at FLLCasts because it makes no assumption on any previous knowledge and tries to introduce everything step-by-step.
- 38
- 193:26
- 30
Дистанционно управление от ЛЕГО Mindstorms
Инструкции за дистанционно управление. При него се използва сензор за завъртане, който определя посоката на кормилото, и сензор за допир, който управлява движението. Тук ще откриете инструкции за подходящо шаси.
Дистанционното управление и колата изглеждат заедно така:
- #420
- 01 Jun 2017
Ugbroid - Модулна кола от ЛЕГО EV3 - Част 1
Инструкции за Модул 1 на Модулния автомобил от ЛЕГО EV3 Mindstorms - Багажник.
Целта на този робот е да научи учениците как да построяват модулни роботи. Тази първа част съдържа само един от модулите.
- #424
- 01 Mar 2017
Snowflake - A Snowmobile Vehicle built with LEGO Mindstorms EV3
Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it.
- #433
- 23 Apr 2018
Squmo - LEGO Mindstorms EV3 short square sumo robot
This robot is a simplified spinoff of the Box Robots (Box Robot 1 and Box Robot 2). It may be build with a single set, but it will require extra technic beams 7x5 with open centers.
The name of the robot - "Squmo" is derived from the ancient tradition of connecting two words to make on and hense - "Square sumo" because "Squmo".
- #591
- 09 Jan 2019