Building Instructions

This is the mat that's needed for level B2 from the SPIKE Prime curriculum. It features a sumo field with a curved outer line for line following. It also has 3 red and 3 green lines for tasks that need the robot to stop at first and third line.

The size is set in the pdf so you can print it as is.

These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.

This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.

These are 3D Building Instructions for M13 Change Shipping Lanes mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Change Shipping Lanes for additional building possibilities.

These are 3D Building Instructions for M10 Sonar Discovery mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Sonar Discovery for additional building possibilities.

An active attachment with a locking mechanism designed to carry, deliver and drop a large object without letting it go. It accomplishes the FIRST LEGO League 2021-2022 Large Delivery mission

Third version of a reusable gear attachment. In this scenario a single motor could power two different axles in two different directions. If you use it to accomplish a mission do not forget to send us a video. We would love to see it.

This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.

This is an innovation construction for accomplishing the FIRST LEGO League 2020 Replay Innovation project mission. The goal of this project is to build something new and innovative during the competition.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Weight Machine mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Rowing Machine Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This robot is designed to easily lift a cup while still holding it upright. With its motor attached to the side of the hub, the robot can lift the cup to any angle you want. You could replace the LEGO cup and make it lift real cups with a few adjustments. Be careful around liquids though, the robot doesn't like beverages like you do!

These are instructions on how to build the:

• Boccia share

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Tan Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.