Този модул е предназначен за тактилната игра за памет и се прикрепя за базата на робота. Този модул използва ултразвуков сензор за да засича ръцете на играча. Трябва да се внимава къде се закрепя, защото играча може да го активира случайно ако се протегне над него.
Solar panels in space are a great source of energy for a space station in the inner solar system, but since things in space are always moving, aiming the panels takes some thought.
Solar panels need to be angled toward or away from you, depending on strategy and conditions.
Both solar panels are angled toward the same field: 22 (for both teams)
Your solar panel is angled toward the other team’s field: 18
Possible scores: 0, 18, 22, 40 as shown below and seen from above your north border, facing north.
“Your” solar panel is the one on your west end of the table.
(mission descriptions source https://www.first-lego-league.org/)
Тази конструкция представлява част от катапулт, чиито инструкции можете да намерите тук.
Коди е робот, създаден да се движи в права линия. Той има един единствен мотор, задвижващ две колела. Зад мотора се крие сензор за цвят. Комбинирайки мотора със сензора, Коди може да се програмира да измерва колко е дължината на всяка ивица от различен цвят, създаващ един същински баркод-четец.
This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.
Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the second attachment from the series.
Тази конструкция представлява част от катапулт, чиито инструкции можете да намерите тук.
В тази анимирана инструкция ви показваме как да преместите брика в изправено положение. Сега щом добавите очички и звуци на робота, той още повече ще прилича на жив! А можете ли да му добавите и ръце?
After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.
Този модул е предназначен за тактилната игра за памет и се прикрепя за базата на робота. Този модул използва сензор за завъртане на средния мотор, за да засече колко е бил завъртян мотора.
Воли е вдъхновен от робота Шпионски мобил. Този малък робот е построен да измерва разстоянията около себе си и да изчислява обема на стаята, в която се намира.
Това е втора версия на Хващач от ЛЕГО Mindstorms. При него се използват четири зъбни колела, които задвижват лостовете.
These are 3D Building Instructions for the 3D Cinema mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
This is a robot attachment that could be placed on the side of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the side of the robot. This specific robot attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
Dwell is a car built with a LEGO MINDSTORMS EV3 set. It uses the medium motor for powering the back wheel and one more medium motor for rotating the front wheels and thus turning. Of course, there is a differential at the back.
Тази конструкция представлява част от катапулт, чиито инструкции можете да намерите тук.
Some say it is cute, other say it is scary, but that's the way bunnies are. You never know if you are dealing with a cute little rabbit or a monster trying to destroy the universe as we know it.. you know, bunnies. This SPIKE bunny was designed by Ahmad Sahar and the building instructions were inspired by this video. and prepared by FLLCasts team as 3D building instructions.
This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions
This is a Garbage container and it is fun. As all garbage containers it has only three wheels as one of the wheels is missing. You can also see how one of the wheels is a little different and broken to the side. Like all garbage containers.
The container is useful to play and put things inside.
Suitable for children 6-10 years old. Construct the Garbage Container and leave it for a week for the children to play with. They will spend at least an hour playing with it during the week
Този модул е предназначен за тактилната игра за памет и се прикрепя за базата на робота. Този модул използва сензор за цвят, за да засича цветовете на колелото си.