Video tutorials

How to keep the discipline in the classroom and how to cheer up the students.

We need to extend the cables to be able to connect them to our Raspberry PI. We must also add new connectors at the end of the cables.

We challenge you before we give you the theory: browse in the software and try to achieve the behavior in the video below.

Following the principles from the previous video, try to make the attachment that you've built, more stable and durable. 

How to help students implement long programs. 

Give it a name and you will have power over it. I learned this from an MIT professor. So let's give the part of the car names. Then we could refer to them. Talk to them. Change them. Do all kinds of things with them. Give it a name and you will have power over it.

In the previous video, we found the correct answer for our task and it is 18.75, or is it?

Try to solve the challenge of this module and observe the cup.

Find a plastic element. Cut it to 200mm by 140mm and attach this plastic plate to the front of our FIRST Technical Challenge Tetrix Robot.

We will explain inertia non-scientifically so that we make it easy to understand concept.

There are number of settings in a Move block and now we will focus on the rotations setting

How to use the robot when the buttons are not accessible.

In this robotics tutorial, we give a few notes for the teacher about adding an axle to the front of the FTC robot and attaching a plastic plate to this axle to make the robot collect balls. 

In the set for the Perfect Course, you have 3 different type of cables. They are called Breadboard Jumper Cables. We would need to use them to extend the default cables on the car and to connect the car components to our new controller

Experiment with the software for about five minutes, before we even give you any directions.

In this video, we introduce two pieces: beam with pins and the angular beam with pins

There are modifications that you must do on the FTC PushBot robot. Let's discuss them

How to add a plastic plate to the FIRST Technical Challenge Robot build with Tetrix. The plastic plate is for collecting the balls. The plate should rotate and should be connected to the axle.

Overview of the big task that we want to achieve in this module.

With the last few videos, we entered the math world. Why we do it and what to keep in mind

How to construct an axle with a plastic plate connected to this axle and make this plate rotate and collect balls.

Let's cover the break at end option and learn why there is no lesson about it to students.

In this robotics tutorial, we would discuss the length of the pipe and its dimensions. These are general considerations for every container on a FIRST Technical Challenge competition. 

How far will the robot move for one second?

Let's attach the ball storing pipe to the FTC robot. In previous tutorials, I've shown you the complete robot, but for this, I've removed the pipe and will show you how to attach it.