This video tutorial is a 10 out of 10, demonstrating how the MiniBox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge.
Yes, the attachment is complex, and there are quite a few actions, but this LEGO Education SPIKE Prime box robot handles them brilliantly! Let's take a look!
This video tutorial demonstrates how the MiniBox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
It may seem challenging to achieve all of this in a single run, but with careful planning and solid programming, success is within reach! The robot is a LEGO Education SPIKE Prime box robot, equipped with rubber bands and various mechanisms. Since this is our final run, we can leave the robot on the mat, saving some time. Let's dive in!
This tutorial in an animated demonstration of how a LEGO Education SPIKE Prime robot turns to the left and to the right. To download the program check out the courses in which the tutorial is used.
This video tutorial showcases how the MiniBox accomplishes five missions - M02, M03, M04, M05, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.
It’s a rather complex run, as the robot uses multiple attachments and performs several actions. The MiniBox, a LEGO Education SPIKE Prime robot, is designed to leave its attachments on the mat after completing each mission. Take a close look at the attachments and study the program thoroughly before launching the robot!
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is a 10 out of 10 tutorial, in which the MiniBox robot accomplishes M08 and M09 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.
The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to release the camera down the track for M08 Rolling Camera. Then, it slightly turns to pull the M09 Movie Set boat model and position it in its designated area. Let's see how consistent and reliable the robot is!
In this video tutorial, the MiniBox robot accomplishes M08 and M09 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
The MiniBox, a LEGO Education SPIKE Prime box robot, uses a detachable attachment to release the camera down the track for M08 Rolling Camera. Then, with a slight turn, it pulls the M09 Movie Set boat model and positions it in its designated spot. Let's take a look!
This is a 10 out of 10 tutorial, in which the MiniBox robot accomplishes M01 3D Cinema of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.
The MiniBox is a LEGO Education SPIKE Prime box robot and uses a detachable attachment to trigger the 2D cinema screen to become a 3D experience. Let's see how consistent and reliable the robot is - 10 out of 10 times!
In this video tutorial, the MiniBox robot accomplishes M01 3D Cinema of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The mission model is located close to the base, and the robot uses a detachable attachment to push and activate it.
The MiniBox is a LEGO Education SPIKE Prime box robot, designed to use detachable attachments, which helps make the runs faster. Let’s take a look!
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. One run takes less than 5 seconds as the mission model is very close to the base, which is why the video is not that long.
The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. Let's see the consistency of this robot!
This video tutorial shows how the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!
This tutorial demonstrates how a robot moves forward in a straight line with the use of the LEGO Education SPIKE Prime Motion sensor. While the robot is moving we push on the robot at the back, simulating that "something has happened" and the robot then again returns back to the moving straight. To download the program check out the courses in which the tutorial is used.
This is a 10 out of 10 video tutorial demonstrating how the MiniBox robot completes M11 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use a LEGO Education SPIKE Prime box robot equipped with a lever to collect the M15 minifigure and a mechanism to rotate the M11 Light Show tower. We've taken a slightly unexpected approach to M11, so be sure to check out the detachable attachment!
In this tutorial we would should you how to accomplish the FIRST LEGO League 2019-2020 Mission called Elevator. We are using the Whakatae - LEGO Education SPIKE Prime Competition Box robot
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is the first video tutorial from the LEGO Education SPIKE Prime programming course in which we use a sensor, and we've selected to use the motion sensor. The Motion sensor allows us to detect how the robot turns in a 3-dimensional space-time continuum, or, to put it simply, we use it to move straight with the robot. That's it. We want to move straight - we use a sensor, and the Motion Sensor is a good choice.
In this video tutorial we look at Acceleration and Deceleration with a LEGO Education SPIKE Prime robot. The goal of the tutorial is to demonstrate the accuracy of the robot when we us default acceleration and slow acceleration.
In this video tutorial we demonstrate the use of the motion sensor and how it could be use to turn precisely to 90 degrees. We demonstrate some of the caveats of the sensor and how sometimes it does not work as expected. Like you set the robot to turn until the sensors detects 90 degrees and at the end the robot is not at exactly 90 degrees.
In this tutorial we demonstrate how a Drop Mission could be accomplished with a Drop Attachment. The robot attachment could be adapted to other drop missions in FIRST LEGO League/World Robotics Olympiad and other robotics competitions. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Raw footage of the mission. Might upload a more polished version soon
Raw footage of how to accomplish the mission. A more polished version might be uploaded soon.
Every time we start the robot we want to start from the same place, not only in terms of where we are on the field but also in terms of how are the motors rotate. The motors have an internal sensor for detecting the rotation. Because of this they know how rotated they are. It is a very good practice to always reset the motors before we start a competition run especially at FIRST LEGO League or World Robot Olympiad competitions
Raw footage of how the mission in completed. We might upload a more polished version soon
How to change the direction of a beam from horizontal to vertical.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Inertia triggered attachments does no require the use of a motor. Let the inertia do all the work. These kinds of attachments are very useful at robotics competitions like FIRST LEGO League and World Robot Olympiad. The robot moves, the attachment falls and grabs the ball. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
We have the following behavior expectations from you during this course:
You ask the question.
You will probably err before you succeed.
You should work as a team. Share solutions with others, help them and allow them to help you.
When the teacher speaks, this is important to everyone.
You should read your lesson before you come to class.