Video tutorials -

• Gears

What should you as a teacher know when the students are trying to achieve a program and robot attachment that could reproduce their behaviour 9 out of 10 times. 

In this video tutorial we accomplish the basketball mission from the FIRST LEGO League 2020 reply competition. We use the LEGO Education SPIKE Prime competition robot called Gazon. You will learn the principles of accomplishing a mission of two parts - put the ball in the basket and lift the basket.

This video tutorial showcases how the MiniBox accomplishes five missions - M02, M03, M04, M05, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.

It’s a rather complex run, as the robot uses multiple attachments and performs several actions. The MiniBox, a LEGO Education SPIKE Prime robot, is designed to leave its attachments on the mat after completing each mission. Take a close look at the attachments and study the program thoroughly before launching the robot!

In this video tutorial, we demonstrate how to release the cargo of a mission model. This mission model is an Airplane. We have to push a lever down to release it. We use an active attachment with a gear wheel.

What should you do as a teacher when the students are calculating the gear ratios and number of needed rotations?

In this video tutorial, we demonstrate how to accomplish M11 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster - a LEGO Education SPIKE Prime robot equipped with gears and a pinless attachment that will rotate the M11 Light Show.

In this LEGO video tutorial we accomplish 3 missions with the Kriket box robot. A number of actions are performed like Lever, Lift, Drop, Pull, Align. This tutorials shows how to accomplish missions models that are closely positioned next to each other.

This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.

This is a 10 out of 10 tutorial where we deliver and drop precisely to complete a FIRST LEGO League 2021-2022 Cargo Connect mission. We reuse the same attachment as in other missions to demonstrate a reusable attachment.

Energy storage mission from FIRST LEGO League 2022-2023 is again a two parts mission where we have to drop a few energy units in the mission model, but we also have to pull part of the mission model. In this video tutorial we demonstrate how the Chain Monster LEGO box robot accomplishes this with a multi purpose attachment for box robots.

In this video tutorial we demonstrate how to accomplish M03, M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster which is a LEGO Education SPIKE Prime robot equipped with two pinless active attachments.

The side attachment uses a gear mechanism to press down a lever and drop the mini figures with loops. It has a more advanced construction with a special lock to prevent the attachment from rotating when mounting it on the robot. Pay attention that the lock should be removed before the start of the run.

We use a special construction to help us align the robot in the base to ensure the robot starts from the same place every time.

In this video tutorial, we demonstrate a reusable attachment. It is the same attachment we've previously used for two other missions. Sometimes we can build such attachments - one attachment that can complete several missions. Yes, the mission is similar - it is Load Cargo, but we are loading the cargo in different places on the field, and that's important.

In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run

This M12 Water reservoir from FIRST LEGO League 2022-2023 is accomplish in two part with the Chain Monster box robot. The first part is in a previous tutorial. This is the second part where we collect the third water unit. We use a passive attachment to collect this unit.

This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.

In the previous video, we found the correct answer for our task and it is 18.75, or is it?

In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.

This is a 10 out of 10 tutorial for a complex robot attachment that does a precise drop and is auto-correcting at the same time. It has decent consistency and reliability. We drop cargo onto the train and use a LEGO Education SPIKE Prime robot for this FIRST LEGO League 2021-2022 competition.

This is a video tutorial where we focus on M14 and M15 of FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. Here, we demonstrate the precision of the attachment. Try to build the attachment and accomplish the missions.

This 10 out of 10 tutorials is about consistency and reliability of the robot when accomplishing 5 missions in a row. We explore how we move between mission models. The programming is in the previous tutorial, here we look and discuss the behaviour of the robot

This video tutorial demonstrates an attachment that flips a mission model. The mission model is attached to the field, but it contains a lever. This lever must be flipped from one side to the other. There is a switch. We use a pinless active attachment with gear wheels, and you can see how this works in the tutorial. There is no use of sensors as we don't need them. We will leave the alignment and positioning for some other tutorials.

This is a 10 out of 10 tutorial for a 3 missions run. The robot goes out of base and accomplishes 3 missions in a single run. It demonstrates the consistency and reliability of the robot and its program that uses sensors.

This LEGO robotics video tutorial is a 10 out of 10 run of the one of the most complex missions at the FIRST LEGO League 2021 RePlay competition. As the mission has three parts we are measuring the success rate of each part of the mission. What you can learn from this tutorial is how to achieve three missions in a single run including line following and a lot of aligning

In this video tutorial, we demonstrate the accomplishment of three missions in a single run. The competition is FIRST LEGO League 2022/2023 SUPERPOWERED and the missions involve carrying and delivering a dinosaur toy, delivering energy units, and delivering the innovation project model.

In this video tutorial we accomplish the FIRST LEGO League 2022-2023 SUPER POWERED mission called M04 Solar Farm. We use the chain monster box robot along with a passive attachment that helps us collect 3 of the energy units. The interesting thing about the mission is the collection of the units, of course, but also the way this robot manoeuvres when there is not enough space. It aligns to the lines, it uses the color and motion sensors. Really advance way to align the robot.

In this video tutorial we pull the Smart grid mission model from the FIRST LEGO League 2022-2023 competition. The goal is to lift the hand to connect with the hand on the other team field. We do this my pulling on the attachment and we reuse the same "hand" that we have for collecting.

This FIRST LEGO League robotics video tutorial is about the Treadmill mission and how it could be accomplished. The mission is from FLL 2020 RePlay competition. Almost every year there is a mission of this type where the robot must spend a lot of time with the mission model in order to turn or lift something. These are quite interesting and challenging missions.