This animated video tutorial demonstrate the use of a lift attachment to accomplish loops mission. It is a lift attachment with a circular motion
This animation demonstrate the use of an LEGO MINDSTORMS Robot Inventor attachment to lift a lever of a mission model. The mission model is the Power Switch mission model where you have to move the lever from one side of the mission model to another. The principle of the attachment is powerful and easy to implement for all kinds of missions.
In this video tutorial we demonstrate the user of a quick 'pinless' attachment. As all pinless attachment it is not that they are completely pinless, but that they do not require the "click" of the pins that is often difficult to achieve in a quick pace environment as during FIRST LEGO League competition rounds.
In this video tutorial we look at Vertical Lift Attachments. The attachment, the root and the mission model are all build from LEGO MINDSTORMS Robot Inventor 51515 set. We've found that vertical lift attachments that could lift missions models vertically could be quite useful for FIRST LEGO League competitions. This attachment is one of the more complex attachments and some say it has an "eye opening" mechanism as you can learn so much from it. It uses gear wheels and two levers connected to those gear wheels to lift a part vertically.
In this video tutorial we demonstrate an attachment that can accomplish Drop missions. A drop mission is when you have to move on the FIRST LEGO League field with the robot, reach a mission model, and drop a part in this mission model. First time we saw such missions I think was in FLL 2013. The attachment, the robot and the mission model could be build from a single LEGO MINDSTORMS Robot Inventor 51515 set. The mechanism for dropping works by releasing a lever when the attachment is pushed against the mission model. Check them out.
It all started with the famous 2017 mission for flipping a manhole and it was one of our favorite missions ever. Here in this tutorial we demonstrate the same principle of flipping a part from one side to the other. Sounds interesting, yes it is, yes it is.
Throwing/Shooting is a common challenge in FIRST LEGO League competitions and in this robotics video tutorial we are demonstrating an attachment that you can use to throw/shoot a ball. There have been missions for throwing balls like in bawling, or like in soccer/football. The attachment that we use relies on the properties of the plastics used for the LEGO MINDSTORMS Robot Inventor 51515 set - it bends and it throws.
In this video tutorial we look at an active attachment that uses gear wheel and the attachment is general enough to be suitable for reuse. This means that a lot of different missions could be accomplished with the same attachment. The goal of the attachment is to transfer power to a lever through a system of axles and gear wheels. It is interesting that we change the orientation of the gear wheels.
This video tutorial had a different idea than what we recorded. We planned for a push/pull attachment as we've shown such attachments for LEGO Education SPIKE PRIME and LEGO MINDSTORMS EV3. However, the issues with LEGO MINDSTORMS Robot Inventor set 51515 is that we could not figure out an easy way to build a push pull attachment that meets our criteria for an attachment. Because of this we made a slight modification on the idea and it is again push/pull attachment but not moving in a line but in a circle - circular movement.
In this video tutorial we demonstrate a robot attachment that could be used to lift loops and other objects. Almost every year there is a mission at FIRST LEGO League competitions that involve lifting and the principle is interesting. You can build the attachment, robot and mission model from a single LEGO MINDSTORMS Robot Inventor 51515 set and learn a principle of building an attachment for lifting.
In this video tutorial we demonstrate a Grab attachment build from LEGO Mindstorms Robot Inventor 51515 set. The goal of the grab attachment is to accomplish the mission of bringing loops back to base without loosing or dropping them when returning. The principle of the grab attachment also demonstrates how to have a a locking mechanism. In this way there is not way to the loop to escape.
This animation demonstrates the use of a Grab Attachment build from LEGO Mindstorms Robot Inventor 51515 set. Many of the FIRST LEGO League missions could be accomplished by grabbing the mission model and the principles shown here is useful for mission models that look like a loop
This video tutorial is about a detachable attachment. In various FIRST LEGO League competitions there are missions that could be accomplished with an attachment and when you accomplish the mission you must somehow leave the attachment along with the mission model. Probably as a support - most of the time it is as a support. But we've seen some pretty powerful concepts that include things like leaving a clock mechanism that will continue to work for 30 seconds accomplishing the mission.
This is a live video tutorial of an inertia triggered attachment build with LEGO MINDSTORMS Robot Inventor. The attachment, the robot and the mission model are all built from a single 51515 set. The cool thing about inertia triggered attachments is that they are active and are activated without the use of any motors which means that you have the motors for the other missions at FIRST LEGO League competitions. In the tutorial we demonstrate and explain how such attachments works and how they could be used.
On every FIRST LEGO League competition and generally robotics competitions with LEGO robots, we build attachments to accomplish missions and we must accomplish the missions in a limited amount of time. Most of the time we can not accomplish the missions with a single attachment and we have to change attachments. This is where building robot attachments that are easy to remove really makes sense. In this tutorial we discuss some of the things that should be considered in the building Easy to Detach modules and attachments
This short animation demonstrates a really useful principle for FIRST LEGO League competition and this is how to use the Inertia of the robot to trigger an attachment that will do the work for us. It is very useful as we don't have to use the motors of the robot and we can afford to use the motors for other things.
In this video tutorial we continue the exploration of pinless attachments and how to add them and remove them in a quick fashion. We've done this for SPIKE Prime and for EV3 and we will provide some other references in the lesson in the course. The idea of an attachment below the robot is that sometime, during FIRST LEGO League competitions we have to bring a mission model from one place of the field to other. Basically push it.
In this video tutorial we demonstrate the importance of properly shielding and protecting the light/color sensors of your LEGO Mindstorms Robot Inventor robots. These principles generally apply for all kind of robots. The problem is that external light sources from the venue could change the behavior of the robot - like have you ever been to a competition venue where the lighting just makes the robot behave in different ways? - well this tutorial is for you!
This animation demonstrates the principle of aligning to a line with two color sensors and a LEGO Mindstorms Robot Inventor robot. This is a useful concept for FIRST LEGO League competitions where you want to know exactly where you are on the field and to achieve consistent behavior. In the course lesson you will also find a live video tutorial where we enter into more details about aligning. We align the robot to a line by moving both sensors slowly until they both see a black line. When one of them sees the line we move only the other. At the end we return the first sensor back.
In this short animation we demonstrate how the LEGO Mindstorms Robot Inventor Distance sensors could be attached to the robot and then use to stop at distance from a wall. This wall could be the border of the field or another mission model. We need an attachment, we need a sensor and we need the robot. In the live video in the lesson we enter into more details and explanations of how the sensor is used. Programs for the distance sensor are provided in the lesson and in the LEGO Mindstorms Robot Inventor Programming course we enter into more details about how to program the distance sensor
This is an animation of a quick pinless attachment that is placed below the robot and is used to deliver parts, like the Container Mission model, to different parts of the field. In the live video in the lesson we explain more about the principles, while here in the animation you can get a quick overview of how it works and you can try to follow the same principles for an exercise.
With this animation we demonstrate an example for a quick pinless attachment that could be used to collect loops. Loops is one of the most common missions at FIRST LEGO League competitions. We use the LEGO Mindstorms Robot Inventor set to build the attachment, the mission model and the robot. They are all from the same attachment. In the live video in the same lesson we enter into more details about the attachment and we describe its idea
In this video tutorial we discuss probably the most useful principle that we've found for FIRST LEGO League competitions and this is how to align to a line with two color sensors. We use the LEGO Mindstorms Robot Inventor for a quick demonstration of the principle. In the LEGO Mindstorms Robot Inventor Programming course we enter into more details of how exactly we program the sensors. The current tutorial demonstrates the use of such a program and makes clear why this could be very useful and is a must for any well prepared team and wants to achieve a good score on the competition.
In this video tutorial we demonstrate a few ways to use the Distance sensor from the LEGO Mindstorms Robot Inventor on FIRST LEGO League competitions. We don't enter into the details about programming as we do in the LEGO Mindstorms Robot Inventor Programming course, because here we demonstrate the behavior of the robot when the sensor is use and we make the argument that you should always use sensors at FIRST LEGO League competitions
In this video tutorial we try to move forward with a LEGO Mindstorms Robot Inventor robot and we try to keep a straight line using the Motion Sensor. Without entering into the details of the programming we demonstrate what is the behavior of the robot when trying to keep a straight line with the Motion Sensor while we are participating in a FIRST LEGO League competition.
In this video tutorial we demonstrate the behavior of a LEGO Mindstorms Robot Inventor robot when we use the Motion sensor. The Motion sensor was also referred to as Gyro sensor in previous versions of the LEGO Mindstorms Robot. We do not enter into the details of the programming and you can download the programs from the course lesson, but we make a demonstration of how the robot turns to about 95 degrees when we try to turn it to 90 degrees, we explain why and we suggest a way to improve the behavior of the robot.
Programming the LEGO MINDSTORMS Robot Inventor for FIRST LEGO League competitions involves learning how to turn left and right with the robot. There are not precise turns. The robot will make mistakes, because that's what robots do. But nevertheless it is important to learn how to program the robot to turn. We are releasing an additional course that is focused only on programming and how to make the robot consistent in its behavior, but in this tutorial we stop on turning