Separate the robot construction on body - body and attachments. Attachments should be small, light and most importantly for winning the competitions they should be pinless. In this category we group tutorials, courses and materials for different attachments that have proved to be useful.
What if the robot could make a mistake and still accomplish the mission? That is what we demonstrate with this tutorial - a few principles for error tolerance and self-correction. Even though we start the robot from a few different places, we manage to complete the mission with the same program every time. We use the LEGO Education SPIKE Prime robot, and we continue directly after the 10 out of 10 tutorial
The after season review continues. No. We are not publishing a single solution for the next season before it is over, but let's learn from the previous season. The current tutorial is about three missions at once on a single run with the robot. Most FIRST LEGO League teams try to accomplish one-two missions on a single run out of the base, and three is really what makes the difference
In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.
In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.
This 10 out of 10 tutorial is a complete uncut recording and it shows how the Chain Monster box robot accomplishes 5 missions in a single run and it does this 10 out of 10 times. It is from the FIRST LEGO League 2022-2023 robotics competition.
In this video tutorial we accomplish 5 missions in a single run with the Chain Monster box robot. It accomplishes 5 missions from the FIRST LEGO League 2022-2023 robotics competition.
This is a 10 out of 10 tutorial for a 3 missions run. The robot goes out of base and accomplishes 3 missions in a single run. It demonstrates the consistency and reliability of the robot and its program that uses sensors.
In this video tutorial we accomplish 3 missions from the FIRST LEGO League 2022-2023 SUPER POWER robotics competition. The three missions are wind turbine, television, rechargeable battery. The robot uses a program with sensor compared to the previous way we've accomplished the missions with the same robot.
This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.
In this video tutorial we accomplish the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery. We demonstrate how 3 missions could be accomplished in the single run and in the same time with a single attachment.
This is the 10 out of 10 version of executing 3 missions in a single run. It worked like a charm! 10 times. We push and collect energy units for the FIRST LEGO League 2022-2023 SUPERPOWERED Challenge competition.
In this video tutorial, we accomplish three missions in a row. It is a little longer and more detailed tutorial, but hey, 3 missions, one after the other. These are the Wind Turbine, where we have to push 3-4 times and collect the energy units, the Watch Television, where we reach the mission model and slightly push, and, of course, the Rechargeable Battery - where we collect the energy units.
This is a 10 out of 10 video tutorial where we demonstrate the consistency and reliability of a LEGO Education SPIKE Prime Active attachment connected to the motors of the robot. The goal of this attachment is to accomplish the Bridge mission where we have to push both parts of the bridge and bring them down to connect them. We use some line following.
In this video tutorial, we accomplish a FIRST LEGO League mission called The Bridge. We demonstrate how to use a really simple active attachment where the goal of the mission is to push down both parts of the bridge. We do not enter into the programming and we leave it up to you as an exercise.
In this 10 out of 10 tutorial, we accomplish the Platooning Trucks from FIRST LEGO League (FLL) 2021-2022. The goal of the mission is to connect the trucks to each other and both of them to the bridge. The attachment and the robot pushes the trucks and we do it 10 times to see the consistency and reliability of the robot.
Need to transfer circular into a linear motion. You need a rack. Here is an attachment with a rack for our box robot.
In this video tutorial, we accomplish the FIRST LEGO League 2021-2022 mission called Platooning Trucks. The goal is to connect the two mission models (trucks) to each other and then connect them both to the bridge. It's quite an interesting mission as it involves three mission models.
In this video we are also focusing on lifting a loop as a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. We demonstrated an attachment for lifting a loop. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.
This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.
"Sometimes it works, sometimes it does not work" - this is the most common case in FIRST LEGO League competitions. In this tutorial, we demonstrate and discuss such a case where the first part of accomplishing the mission always works but the second part has about 60-70% success rate. The robot is not very consistent. Let's take a moment to see it and explain why so that we can resolve the problem in the next lesson.
In this video tutorial, we use the motion sensor and demonstrate 10 out of 10 times how we can keep the robot moving in a straight line. The program is described in the previous tutorial in the lesson where we enter into the programming. Here we visualize how consistent and reliable the behavior of the robot is.
In this tutorial we demonstrate how a loops mission could be accomplished with a Push/Pull Attachment. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is a 10 out of 10 tutorial for pushing gently on a mission model. We also discuss how to build robots that tolerate error and auto-correct their behavior.
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.