This page shows all the robotics tutorials listed without specific grouping. Each tutorial is short, on specific topic, has a video. Tutorials are structured in sequence in Courses.
One more example for an active attachment with a system of gear wheels. This time the system is constructed so that the attachment could lift heavy objects.
In this video tutorial, we demonstrate a full run for the FIRST LEGO League 2024-2025 SUBMERGED challenge, completing all missions in a single sequence. Each mission is shown individually beforehand, with close-up views of how the attachments work and the principles behind their design. All attachments are pinless, making them quick to change during the run, though aligning and loading the robot still requires practice. The strategy involves moving from one base to the other while accomplishing as many missions as possible, including retrying those close to base when needed.
While the complete run takes longer than the official 2.5 minutes, the focus here is on demonstrating reliability, consistency, and the trade-offs between time and scoring points. In some cases, missions are skipped to focus on higher-value tasks, but in this run, we aim to complete them all. The result is a strong performance that comes close to the maximum possible score.
This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot for precise engagement with the mission model.
The goal is a perfect 10 out of 10 runs by positioning all four crabs upright with their yellow bases touching the mat. You can find the full explaining tutorial here.
This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot, designed for precise engagement with the mission model.
The goal is to position all four crabs upright with their yellow bases touching the mat for maximum points, a task requiring careful alignment and controlled movements. While it is possible to complete the mission with fewer crabs upright, this run is programmed for the full score, using dedicated movement commands in a separate run for maximum accuracy. This approach combines a reliable mechanical design with precise navigation to meet the mission’s demanding scoring conditions.
This 10 out of 10 video tutorial focuses on the flawless accomplishment of M05 Angler Fish, M09 Unexpected Encounter, M10 Send over the Submersible, and M11 Sonar Discovery of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot.
The run uses a combination of aligning, front, and back attachments to execute multiple tasks in one run, including a rotation transfer system using a single long axle for M11, early execution of M10 for a strategic edge, and sensor-based alignment for precision. Despite the reduced per-run accuracy due to the mission count, this method ensures that when the run works, it secures an exceptionally high score.
This video tutorial focuses on accomplishing M05 Angler Fish, M09 Unexpected Encounter, M10 Send over the Submersible, and M11 Sonar Discovery of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses three attachments in sequence: an aligning attachment at the start to reduce initial inaccuracies, a front attachment for solving M05 and M10 while collecting krill, reef segments, and the water sample, and a back attachment for solving M11, delivering the unknown creature for M09, and collecting plankton and seabed samples.
The front attachment is particularly interesting in this configuration because it integrates two color sensors and one motor directly onto the attachment itself. These sensors are used to align the robot to the black line near M10, while the aligning attachment at the start ensures a precise launch position.
This version of the big run takes on significantly more missions in a single attempt than a standard sequence, which naturally comes at the cost of reduced accuracy. In the current FLL competition format—where only your best score from three attempts is counted—this trade-off can be highly strategic. A run that works perfectly even just once can yield a massive point boost, making this kind of high-reward, lower-consistency approach a potential game-changer for teams willing to take the risk.
This video tutorial focuses on accomplishing M10 Send Over the Submersible of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot. In this series of test runs, the goal is to achieve 10 out of 10 successful deliveries where the submersible reaches the opposing field, and the robot disengages without touching the mission model at the match’s end.
The run uses a simple pinless attachment with stopping beams for consistent positioning, combined with programming that integrates a parallel timer for perfect match-end execution. This setup gives the robot the highest possible success rate for both mission requirements across repeated trials.
This video tutorial focuses on accomplishing M10 Send Over the Submersible of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple pinless attachment that engages with the front gearwheel of the robot to raise the yellow slider. Built-in stopping beams ensure the attachment always starts from the same position for consistent operation.
This minimalistic but reliable design allows the robot to perform the lift with stability and repeatability, making it well-suited for a time-sensitive mission. The attachment’s simplicity also enables quick setup between runs, keeping it competition-ready.
This video tutorial focuses on accomplishing M02 Shark, collecting the trident for M14 Sample Collection, and collecting a Krill for M12 Feed the Whale of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment with two locking beams for stability, featuring two main “chambers” and a motor-powered arm with rubber parts for handling multiple mission elements.
The left chamber is used to push the shark from M02 into its habitat, while the opposite side has a passive beam-trigger mechanism to drop a wall and catch the Krill in front of the shipwreck. The motorized arm slowly lowers to grab the Trident from the bottom using rubber parts, a solution that is not 100% reliable due to the challenge of the element but is the best tested option. The side locking beams are essential for keeping the attachment secured during these precise maneuvers, preventing it from detaching during the run.
This video tutorial focuses on accomplishing M01 Coral Nursery and M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The aim is to see a consistent accomplishment by lifting the coral tree to the coral tree support and delivering reef segments outside the launch area in one smooth sequence.
The robot uses a motor-powered attachment to lift the coral tree precisely while a side holder secures the collected reef segments. This ensures both missions are completed without losing any pieces during movement. You can watch the full explaining tutorial here.
This video tutorial focuses on accomplishing M01 Coral Nursery and M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless motor-powered attachment specifically designed to raise the coral tree to the coral tree support while delivering reef segments outside the launch area. This attachment was chosen after testing multiple designs, and it proved to be one of the most reliable solutions for this task.
The motor-driven lifting mechanism is mounted using long axle pins due to the gearwheel’s position, and a heavy brick is added on top for extra sturdiness, preventing the attachment from popping off during operation. On the side, a simple holder secures the three reef segments collected in previous runs for easy delivery during this mission. This combination allows the robot to lift the coral tree smoothly, place it accurately, and complete the reef segment delivery in a single, well-coordinated sequence.
This video tutorial focuses on accomplishing M06 Raise the Mast and M07 Kraken’s Treasure of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The point is to achieve a perfect 10 out of 10 score for these interconnected missions in one smooth sequence.
The robot first secures the treasure chest before fully raising the mast, avoiding the mechanism that would otherwise lock the chest in place. This requires precise timing and control to push, lift, and stop at the correct point, then complete the mast-raising motion. You can watch the full explaining tutorial here.
This video tutorial focuses on accomplishing M06 Raise the Mast and M07 Kraken’s Treasure of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment connected to the bottom of the robot, featuring side guides with stoppers for precise mast lifting and a central rubberized section to catch the treasure chest.
The challenge in this run is to collect the treasure before raising the mast fully, as the mission model locks the chest if the mast is lifted too far too soon. The robot must push and lift with great precision, stopping at exactly the right point to avoid triggering the lock, then continue raising the mast to complete the mission. This sequence demonstrates careful mechanical design, accurate programming, and precise timing to accomplish two interconnected missions in one smooth run.
In this video we are also focusing on lifting a loop as a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. We demonstrated an attachment for lifting a loop. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this video tutorial, we demonstrate a full run of all the missions in the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition, using the MiniBox - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for teams looking to see how they can tackle the entire range of missions, pushing their accuracy, speed, and self-control to the limit.
In this video tutorial, we demonstrate a full run of all missions without pausing the recording. The competition is the FIRST LEGO League 2023-2024 MASTERPIECE Challenge, and the robot is the Chain Monster - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for team preparation right before the competition, as they help team members improve their accuracy, speed, and self-control.
In this tutorial we demonstrate how a loops mission could be accomplished with a Push/Pull Attachment. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this video tutorial, we demonstrate how to accomplish M11 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster - a LEGO Education SPIKE Prime robot equipped with gears and a pinless attachment that will rotate the M11 Light Show.
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
How do you lift heavy objects with an attachment? In this episode we show a simple, interesting, but yet not very popular way to lift something heavy with and LEGO Mindstorms EV3 robot and without gears and motors as attachment. As a specific example we are using the Strength Exercise mission from the FIRST LEGO League 2012 competition.
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. One run takes less than 5 seconds as the mission model is very close to the base, which is why the video is not that long.
The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. Let's see the consistency of this robot!
This video tutorial shows how the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!
LEGO Mindstorms EV3 Crane robot is used to lift, move and load cargo on a cargo truck. There is a mechanism for grabbing a cargo load (eg a blue ball). Crone is also a tower crane and there are balancing wheels on the opposite site of the grabbing mechanism. It was an ultrasonic sensor.
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M09. STRENGTH EXERCISE. I could think for a couple of missions in previous years that require lifting a heavy object. Let's see how this mission could be accomplished.
Build a rack and try to lift the robot with this rack.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.