Programs -

• LEGO MINDSTORMS EV3

The programs are designed to be used with Mintonet - a LEGO Volleyball robot.The project consists of several programs:

• Shoot - just shoots the ball.
• ShootWithUltrasonicSensor - this one is pretty much the same, but uses the ultrasonic seonsor infront of the robot as a triger.
• MoveAndShoot - the robot moves sideways until it sees a target and then it shoots the ball at it. This can be either its "volleyball partner" or a box or some other target practice object.
• MoveShootGoBack - the robot moves sideways until it sees a target, shoots the ball and then it returns to its starting position.
• MovePassMove - the robot moves sideways until it sees a target, shoots the ball and then it continues moving. This program is great to be used with second robot and try to pass each other the balls.

These are the programs for our boxing robots and their Joysticks. They are made for a game of two fighters with their respective joysticks, fighting until one is knocked out or its "heart" touch sensor is punched by the other robot. The fighters require the two "leg" motors to be connected on ports B and C and the hand medium motors on port D. The touch sensors should be connected on port 1, however keep in mind that the game may be better without them. The distance sensor has no purpose in the program as it is used only for aesthetics. The joysticks require the motor for forward and backward to be connected on port B and the motor for left and right to be connected on port A. The touch sensor operates the hands and must be connected on port 4.

This is an EV3-G project that contains two programs implementing an Integral compensation - integral part of the PID algorithm. The first program is for a Five Minute Bot and the second program is for Box Robot. The things that you should be careful when using the program for your robot are the direction of the motors in the steering block; whether the motors in the steering block are written as "B+C" or "C+B" and the coefficients in the two math blocks. The coefficients that we've chosen should work for most of the robots, but will probably not work for some of them. If they don't work, write to us, comment below in the comment section or drop us an email. 

In this program, we return the robot to a straight orientation at the end of the program. If there is not enough time for the Mindstorms Gyro sensor the correct the orientation of the robot before the end of the program, then we should do it at the end.

This package contains the three blocks used in the advanced calibration section of the FLL course.

The blocks contained are:

• InitiArray block
• CalibrateMinMax
• GetCalibrateValue 

This is the example program using the blocks available at  Blocks Package for Advance Calibration of LEGO Mindstorms EV3 Color/Light sensors. The program makes the robot find the minimum and maximum values and to calibrate the current sensor value depending to the min and max.

This block accurately turns the robot to a specific angle. One of the most useful blocks that you could use during competitions. The block makes the robot turn and when the robot makes an error, the block will correct for this error. 

Finally, you can be sure that the robot has turned to the specific angle that you want.  

You have three inputs

• Turning angle - the angle that you would like the robot to turn.
• Power - the power that you would like the motors to have
• Correction power - the power during the correction phase. 

VERY IMPORTANT: This is a block for EV3-G. You download and import this block from Project Settings->Blocks->Import. If you are using Internet Explorer or Microsoft Edge and you click to download the file it will try to save it as "zip". DO NOT SAVE IT AS ZIP. Save it as "ev3s" or just PLEASE, STOP using Internet Explorer or Microsoft Edge. This will dramatically improve your browsing experience.