Building Instructions

Building instructions for a LEGO Mindstorms EV3 robot that we call Space Explorer. The motors are attached in a very interesting way to the brick. Both the brick and the motors are vertical and there are not many robots like this. With its ultrasonic sensor, this robot allows you to follow, find or avoid objects. Just like an explorer. And since it is a robot why not put it in space and call it "Space Explorer".

There is one part that is not from the EV3 sets, but you can actually skip it. You don't need it. Try to find which one.

Following the Spy Bot, we have this new Spy Vehicle. Yes, yes it is using an ultrasonic sensor.

The building instructions are for a robot base that looks like a car but is not exactly a car and has a strange shape. Just like spy vehicles - a car, but not only a car and not just a car. 

This robot is part of the category of robots called animals. After following the building instructions you would have a frog that could jump. Of course, the jump depends on the surface and the friction between the robot and the ground... quite complex physics involved. But if you program it to move forward it will try to jump and it is your job to try to make it jump higher. 

You could try to extend some of the legs, for example.

Again a LEGO animal. This time it looks like an ant. It's interesting that this robot has no wheels and moves in a way very different from the rest of the "wheel robots". 

There is much to be learned about mechanics from the way animals move. Ants are a good example. In the real world, an ant could carry a load of 20x its mass. It would be interesting to see how much load could this robot carry? Try it. 

LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use. 

Maze Runners are one of the very popular robotics competitions. But there are a lot of limits that the robots must comply with. Like the size of the robot. 

This here are building instructions for a very small maze runner robot, build with LEGO Mindstorms EV3. It uses two tires that are technic and not Mindstorms simply because none of the Mindstorms tires fit the size limit. 

The robot has an Ultrasonic sensor and a Gyro sensor at the top. 

The building instructions are for a robot that kind of looks like the Spy Bot but it has treads instead of wheels. Like a Tank. Tank Spy Bot. Treads are always funny and you could use the robot chassis base to extend with additional attachments and tools. 

It moves and it collects. It collects objects.

These are building instructions for a LEGO Mindstorms robot that could collect objects. It is not actually catching them and that's why we call it "Simple Catch Bot". The general case is to program it to move on the floor and collect some of the Mindstorms wheels and tires coming with the 45544, 45560 or 31313 LEGO sets.   

"Bot. Spy Bot."

Many of us are fascinated by the idea of spies. Movies for "spies" are also very popular and if you haven't watched them check out the 007 movies. These here are building instructions for a LEGO Mindstorms robot with two touch sensors and one ultrasonic. It could be used as a spy - sneaking closer to you and detecting if you move or if you touch it. The whole idea for this robot came from NXT when there were sound sensors. Currently, there are no sound sensors in the EV3 set, but the robot could again be quite fun to program.