Building Instructions

Uylam is a robot that simulates a stormy environment for its ship. It is made using two piston-like mechanisms powered by a Large motor and offset by 90 degrees to create shaking similar to that of big waves. The ship itself is made out of a medium motor on a turntable and a gyro sensor attached to them. The purpose of this is to explore what is the best position of a ship compared to the waves, so that it sustains the least amount of shaking.

Barco from spanish means boat.

The robot is made to look like a sail ship. The sails are made out of technic panels, attached in various ways to create the best look. Otherwise the robot uses two motors with tyres to move. At the back of the robot there is a Gyro sensor, which helps it maneuver.

Mintonet (engl. Mintonette) comes from the name of the first iteration of volleyball.

The robot can move only forward and backward, without turning, with the help of a large EV3 motor. Another large motor is used to shoot. The robot uses an EV3 ultrasonic sensor to detect its partner and throw a ball at it.

LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use. 

This is the simplest possible line following robot. It has just one sensor in the front between the two driving wheels and uses beams as pivots instead of a third wheel. Try it out. Follow the building instructions and start following lines in a number of minutes.

Build from LEGO EV3 Core and Expansion set this robot looks like a scorpion. The Scorpion strikes, when it sees a pray with the ultrasonic sensor and you can use the touch sensor and the rotation sensor to control the spike movement. It has a scissor mechanism at the back using a system of gears and levers. 

It's the second version of the Robot Base 4, but with rotated inside motor.

A simple robot for classes, with Vex IQ Touch Sensor.

The CubeHunter uses the ultrasonic sensor to detect a ball or cube. Next, the robot catches it and reads the colour of the object using the EV3 colour sensor. The building instructions are suitable for classes with students and if you are working alone at home.