Building Instructions -

• Ubuntu

The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set

User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.

The construction is built with LEGO Mindstorms EV3

Building instructions for this part of the BigDaddy competition robot

Building instructions for the gear attachment. 

Instructions for building the five minutebot used in the tutorial.

Malen comes from Malentendu, which means misunderstanding in French.

The robot has a color wheel with 4 colors in the back and a color sensor in the front. When you show a color to the color sensor, it can show it back. You can chain multiple of these robots to make a telephone game!

Paga is named after the famous violinist Niccolò Paganini.

The robot is designed to resemble a violin. The faster the motor turns, the higher the pitch it produces. Let’s see if you can play a concerto on it!

This robot is made to serve as a cautionary tale for the line following robots with exposed to the ambient light sensors.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.

These are instructions on how to build the:

• Doorstep
• Package

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Cargo ship

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Turbine blade
• Blue holder

You can find more building instructions and tips and tricks about the competition on this page.

This is an innovation construction for accomplishing the FIRST LEGO League 2020 Replay Innovation project mission. The goal of this project is to build something new and innovative during the competition.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Rowing Machine Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

These are instructions on how to build the:

• Tan Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.