Building Instructions -

• EV3-G

These loops can be used to practice different methods of collecting them. This is a very common challenge in FLL.

"Muni" is short for mountain unicycles - Munis.

This robot is designed to resemble a clown on a unicycle. It uses a large technic gear ring to move forward and backward. On top of the robot is a force sensor, disguised as a clown. You can program it so that when you touch its head, the robot starts!

In Scottish Celtic, "asal" means "donkey."

The robot is designed to resemble a beast of burden. It moves with its four legs, which are connected in pairs to motors on the left and right sides. On its back, it has a platform connected to a force sensor, which can be used to measure if the robot is carrying too much cargo.

In Maori, "poti" means "boat."

This robot is made to look like an ancient boat. It moves using two motors with wheels. On top, it has one mast with a square sail, controlled by a single motor!

An active attachment with a locking mechanism designed to carry, deliver and drop a large object without letting it go. It accomplishes the FIRST LEGO League 2021-2022 Large Delivery mission

In Dutch, "muur" means "wall."

This robot is designed to have a wall in front of it to clear obstacles, which is where its name comes from. Can you make your own wall?

With this LEGO robot attachment from LEGO Mindstorms Robot Inventor we accomplish the Rowing Machine from FIRST LEGO League 2020. The attachment works like a hook that catches the wheel of the Rowing Machine mission model and pulls on it. There are gear wheels that transfer the power from the robot motors to the hook at the end. This attachment shows the principle of catching things

This is a complex three parts attachment for the FIRST LEGO League 2020 Replay competition mission called Boccia. The attachment does three things in the same time. It can align to a mission model, It has a contained for boxes that should be dropped and it also has a lever to rotate the boccia target mission model. On top of the that the attachment is working 10 out of 10

This robot attachment is placed at the front of a LEGO Education SPIKE Prime competition robot to facilitate and accomplish the FIRST LEGO League 2020 RePlay Step Counter mission. We can use the attachment or we can skip it.

These are instructions on how to build the:

• Accident avoidance

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• West bridge with latch
• East bridge
• Center support

You can find more building instructions and tips and tricks about the competition on this page.

During a competition a team of students had to build a robot that looks like a musician. This construction in front of the robot is a Trompet and it looks like Ane is playing some music. If you play music on the phone on the side it is really funny to watch it play.

This is the Coffee Pot, along with a coffee mug. It was 2 hours of fun

You know those constructions that you need to push or pull something and you get a cool chain reaction, right? Here are the building instructions of such a Chain Reaction built with LEGO Mindstorms 51515 Robot Inventor set. This construction was created to be used with the smallest Inventor robot Tricky and its Kick the ball attachment. The goal is to program the robot to kick the Mindstorms/Duplo ball, included in the set, so that the ball could push the lever and start the chain reaction.

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Football Goal
3. Basketball hoop

These are instructions on how to build the:

• Colored health units
• Season tiles

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Boccia Frame

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Heavy Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.

3D Instructions on how to add a diode to the Raspberry Pi and indicate when the Raspberry Pi is turned on. 

Step by step guide on how to add the SD card to the Raspberry pi. 

The Raspberry Pi must not be powered.