Building Instructions -

• Ubuntu

This set of two attachments for the Nautiq robot is designed to collect and deliver the scuba diver for M01 Coral Nursery and M04 Scuba Diver, collect the shark for M02 Shark, and flip the coral reef for M03 Coral Reef in the FIRST LEGO League 2024‑2025 SUBMERGED competition. One attachment is mounted from above, and the other from below, allowing efficient execution of multiple missions in a single run.

This attachment for the Nautiq robot is designed to accomplish M07 Kraken’s Treasure and M06 Raise the Mast from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive treasure chest collecting mechanism and uses hooks to restrict the inertia-driven movement of the Mast, allowing fast movements without triggering it prematurely.

This set of two attachments for the Nautiq robot is designed to solve multiple missions from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It completes M05 Angler Fish, collects 4 Krills for M12 Feed the Whale, gathers all Reef Segments for M03 Coral Reef, and collects all Samples for M14 Sample Collection. The two-attachment design allows for efficient execution of multiple tasks in a single run.

This attachment for the Nautiq robot is designed to lift the coral for M01 Coral Nursery from the FIRST LEGO League 2024‑2025 SUBMERGED competition. It performs two actions simultaneously: lifting the mission model loop and opening the door that holds the Reef Segments.

The attachment helps the robot to delivers the water to the dam, releases the water in the Hydroelectric dam to produce energy, and delivers energy units to the energy storage. With this attachment, the robot accomplishes M03 ENERGY STORAGE, M11 HYDROELECTRIC DAM, and M12 WATER RESERVOIR from the FIRST LEGO League 2022-2023 SUPERPOWERED competition.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It is an experiment we did that didn't work out for the FLL 2023-2024 MASTERPIECE field, but is interesting nonetheless. It shows how you can take an out-of-box robot and put a steering mechanism on it.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment uses rubber parts to compensate for the lack of precision in positioning the robot near the mission model. That was needed since at the time that this attachment was used, the robot had moved a long distance since its last aligning at a wall or other mission models.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This attachment accomplishes three missions from the FIRST LEGO League MASTERPIECE. It is for the Chain Monster Robot. It accomplishes Mission 10 - Sound Mixer. It also partially accomplishes Mission 14 - Audience Delivery.

These are 3D Building Instructions for M13 Change Shipping Lanes mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Change Shipping Lanes for additional building possibilities.

In Slovak, "koleso" means "wheel."

This robot is designed to move like a monowheel. It achieves this by shifting its center of mass on a large technic gear ring using two medium motors with small gearwheels. Although the robot can't turn, it looks impressive!

These are 3D Building Instructions for the Audience Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.

3D building instructions for the watch television LEGO mission model from the FLL 2022 competition

Attachment for grabbing loops build from LEGO MINDSTORMS Robot Inventor 51515 set. We use this robot attachment to accomplish missions with loops at FIRST LEGO League. Well, we use the principle, that is what's important. Check out the attachment and the course to understand the principle of grabbing loops.

These are instructions on how to build the:

• Airplane
• Truck
• 2x Activators

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Switch engine

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Chicken statue

You can find more building instructions and tips and tricks about the competition on this page.

Zat is fun. Zat is great. It is a simple construction for a car with 4 large wheels. And who does not like cars with large wheels. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 we had a lot of fun with it on Sunday. It was an idea of my wife and the kids took a lot of time putting things on in and moving it around. Just put things on it and play with it.

This is a module that looks like a fish's head. It uses a touch sensor for a mouth and is otherwise purely cosmetic. The module is used in Piscis - a LEGO Mindstorms EV3 Fish robot.