Building Instructions -

• FIRST LEGO League

This attachment for the Nautiq robot is designed to collect the Trident Parts for M14, deliver the Shark for M02, and collect one Krill for M12 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It features a passive trigger for the krill collection and aligns the robot with the mission model before collecting the trident parts.

This attachment for the Nautiq robot is designed to collect the Krill, the Reef Segments, and the Water Sample, while accomplishing M05 and M10 in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It combines multiple functions to complete several missions efficiently in a single run.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This attachment accomplishes three missions from the FIRST LEGO League MASTERPIECE. It is for the Chain Monster Robot. It accomplishes Mission 10 - Sound Mixer. It also partially accomplishes Mission 14 - Audience Delivery.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

These are 3D Building Instructions for M10 Send over the Submersible mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Send over the Submersible for additional building possibilities.

This is a Kriket box robot attachment used for pushing a lever and precisely dropping energy units. It is used for FIRST LEGO League 2022-2023 SUPER POWERED mission call M03 Energy storage and M11 Hydroelectric Dam. This is a multi-purpose attachment that can do more than one thing at a time.

These are 3D Building Instructions for the Audience Delivery mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.

Second version of a reusable gear attachment. This time the black gear wheel is at the top. It is useful when you are constrained by space.

This is an Inertia triggered attachment build with a LEGO MINDSTORMS Robot Inventor 51515 set. With this attachment we can collect different parts and bring them back to base at FIRST LEGO League competitions. The principle is useful as no additional motors are required for activating this attachment. In the same time it is active which means that it moves and can change it's position in space separately from the robot.. which is useful

These are instructions on how to build the:

• Switch engine

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Airplane
• Truck
• 2x Activators

You can find more building instructions and tips and tricks about the competition on this page.

- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;

You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot

This is the beautiful version of the robot. :) It is more likely for having fun, than use it for competition. It have beautiful front that is not very useful for a competition, due to larger attachments, but it is a little bit more stable than the "uglier" and smaller version. :)

This robot is very low, relatively compact and very hard to control. To move as desired it must carry heavy attachment between its front tires. It also needs often clearing of its rear balls and the beads where they are positioned. Ones that is done the robot becomes pretty accurate. If you change the front tires with tires that have higher grip than the ones in the Spike set it becomes precious. Spike Prime Tires don't have grip but looks good. :)

It is ideal to learn how to control robots in real world applications where nature plays bad jokes on the engineers.

The two color sensors look up so it can see the attachment control parts, so it decides what part of the program to run. It have only one attachment motor with only 1 attachment element - 28 Teeth and 4 holes Gear.

This attachment for the Nautiq robot is designed to accomplish M12 Feed the Whale in the FIRST LEGO League 2024‑2025 SUBMERGED competition. It demonstrates how to use mission models as part of a passive mechanical trigger and how to apply carabiner mechanisms for purposes other than locking.

These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.

The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.