Here’s a list of all the tools you’ll need to build the DIY Rotating LED Clock Display. Each tool links to Amazon. If a link isn’t available, we’ve included tips on how to find another one.
Необходимо е да се абонирате за FLLCasts.com, за да достъпите това видео
- #2481
- 06 Nov 2025
Drill - This project can be completed with any drill. You can get a drill from any local hardware shop.
Drill Bit Set - For this project, you'll need 2 mm, 3mm, and 6mm drill bits. You can get drill bits from any local hardware shop.
Wire Cutters - Any wire cutters will do the job, but having a wire stripping tool can help make the project a bit easier. You can get wire cutters from any local hardware or electronics shop.
Mini Screwdriver Set - The screwdriver must match the screws that you'll use. You can get screwdrivers from any local hardware shop.
Soldering Iron - The higher the wattage W, the easier it is to work with. We suggest looking for a soldering iron that is at least 100W. If the soldering iron does not come with a sponge or brass tip cleaner and a stand, then you'll need to get those as well. You can get a soldering Iron from any local electronics shop.
PCB holder - Any such holder that comes with a protective surface underneath the workplace will do fine. You can get a PCB holder from most local electronics shops.
Desoldering Pump - Any desoldering pump will do. You can get a desoldering pump from any local electronics shop.
Clamps - Any woodworking clamps will do the job. For this project, you need 2 at most.