There are tools you need when conducting the course with a class of students. They are similar to the tools that you personally need, but as a teacher, these are the things that you should be prepared for.

Необходимо е да се абонирате за FLLCasts.com, за да достъпите това видео
- #719
- 01 Feb 2018
- Electronics
- Learn At Home, Teacher's Note, STEM, Classes with students, Fun, Construction, Programming
TL. DR.
- Screwdrivers - 5-10 pieces
- Weights - 100 g to 1 kg. at 5 pieces
- Rope/Cable Tie - at least 50 cm each. About 5-10 if rope. If cable tie you will need more.
- Batteries - look for rechargeable batteries.
- Markers and pens - 5-10, preferably with different colours.
- A list of sticky notes (smallest sticky notes) - 5-10 sheets
- Lighters (as in lighter for cigarettes) - 5-10 pieces
Screwdrivers
Each student must have a screwdriver suitable for the car. These are the ones that we are using. They are with magnetic head with size 3mm. You will need 1 screwdriver for each car. 10-15 in the classroom should be enough.
Weights
You will need the weights during the first class to put some weight on the car to experiment with it. Anything that is not more than 1 kg is great. This could a bottle of water, or some small boxes, or even in one of the academies the teacher used some candles that he found in the room. Pretty interesting.
Rope/Cable tie
We need to attach two of cars together and to see which car will drag the other. Long Cable ties are also fine. It needs to be at least 50 cm.
Batteries
You will need a lot of them. Better to have rechargeable batteries.
Markers and Pens
You need a way to mark the cables when disassembling the car. We would use sticky markers and we must write with something on them. No picture included. Just markers and pens :)
Курсове и занятия включващи този Урок
Този Урок е използван в следните курсове и занятия.

Perfect STEM course. Module 1 - Smart Car with Raspberry PI
Disassemble a remote control car. Change the brain of the car with a smart computer like Raspberry Pi. Build a smart device with artificial intelligence that you could control from your phone and that could freely navigate itself in the real world and on the Internet. Use your hands. Develop programs for your robot and your phone. Be curious and invent.
The perfect course lives up to its name. You move through the content, we check it and return feedback to you.
In the end, you should be able to better understand how to program and design smart devices that would make the world a better place. For everybody age 12+, 16+, 21+, 35+, etc. The hardware costs about 150$. It changes through the years so it might take some time for you to find it as Raspberry PI, motor drivers, power banks and h-bridges.. they change. Note that the course was designed to be led by a teacher with a decent knowledge in embedded hardware and software. This, on the other hand should not stop you, if you are curious.
- 118
- 42:47
- 136

Introduction
In the first module of the perfect STEM Course we will move fast, but not deep. We would explore a number of different areas of technical science like electronics, Linux, programming, mobile technologies, AI without getting into too many details. The goal is for us to arrive at a working Remote Control car controlled from the phone and to learn basic concepts on which we could extend.
- 7
- 0
- 0
- 3d_rotation 0