Building Instructions

Filters:

Bag 9 - Crane - FIRST LEGO League 2021-2022 CARGO CONNECT

These are instructions on how to build the:

Crane with container

You can find more building instructions and tips and tricks about the competition on this page.

#1390
05 Sep 2021

FLL 2020: Attachment for Health Units mission

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Precision mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

#1328
04 Jul 2021

FLL 2020: Attachment for Treadmill mission

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Treadmill mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

#1324
29 Jun 2021

Bowling pins mission models FLLCasts Off-season Challenge 2019

Bowling pins mission model reworked from a LEGO Mindstorms EV3 version available at Bowling pins mission models. FLLCasts Off-season Challenge 2019 to a LEGO Education SPIKE Prime version available in this material. You can follow the same construction to assemble as many pins as you need. In 3D building instructions for you to construct them.

#1275
29 Mar 2021

'Flip attachment' mission model, with building instructions

Yes, this is a single part. The whole instruction is a single part. This is not an error. This is the part that we use to demonstrate a flip attachment. For consistency even though it is a single LEGO Education SPIKE Prime part, we show the part visually, we don't just mention it in the comments.

#1276
18 Mar 2021

Zatty - a mini car from LEGO Education SPIKE Prime in 3D building instructions

Zatty is the smaller sibling if Zat. Zatty is small and cute. It's a car on a frame with 4 small wheels and of course two mini figures riding in it or on it. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my 7 years old daughter and then slightly improved by me and the colleagues.

Play time for a week: About an hour

#1192
13 Nov 2020

Bag 7 - Treadmill - FIRST LEGO League 2020-2021 RePLAY

These are instructions on how to build the:

Treadmill

You can find more building instructions and tips and tricks about the competition on this page.

#1130
31 Aug 2020

Weeemake Traffic Light

#1040
20 Jun 2020

Глава на Овен от ЛЕГО Майндстормс EV3

Този модул е направен да изглежда като глава на овен направена с ЛЕГО Майндстормс EV3. Тя използва ултразвуков сензор, който е насочен надолу, все едно овена атакува, като очи. Може да се комбинира с други модули за да се направи перфектният робот-овен!

#970
24 Jan 2020

Платна на кораб от ЛЕГО Майндстормс EV3

Този модул е направен да изглежда и да се движи като платна на истински кораб! Модулът се състои от две мачти, които са свързани за да се движат заедно. Задната мачта е свързана към среден мотор, който може да движи всички платна и също е свързан към жироскопичен сензор, който засича дали целият кораб се е завъртял. Този модул се използва в Йоланда - LEGO Mindstorms EV3 робот кораб.

#973
24 Jan 2020

Sorting sheet for EV3 Mindstorms Set (English language)

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

#831
24 Jun 2019

Dispenser mission model. FLLCasts Off-season Challenge 2019

Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.

#777
22 May 2019

Ремило - LEGO Mindstorms EV3 робот лодка

Ремило идва от езика есперанто и означава гребло.

Робота прилича на лодка, но се движи по земя. Използва два големи мотора с закачени "гребла" за да се движи. Заради странния начин на движение, използва жиро сензор за да се движи в правилната посока.

#744
17 May 2019

FLL 2018: Nightbeast Multi-purpose Attachment. M06, M10, M12

This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge

The run with this attachment is very inconsistent and fails very often.