Хуракан, от испански, означава ураган.
Този робот е направен да прилича на увеселителна атракция тип ураган. Има две места за LEGO минифигури, които са свързани с гъвкава тръба за робота. Той ги завърта със среден мотор. Той може да се контролира от сензор за сила, който прилича на клоун и стои на безопасно разстояние от увеселителната атракция.
Кухму, от финландски, означава неравност.
Този робот е направен да прилича на блъскаща количка, но също и да покаже много важен урок - инерция и център на тежестта! Хъбът му е свързан без щифтове за да може да го движите по конструкцията и да променяте центъра на тежестта. Роботът се движи с помощта на два средни мотора с две големи колела на тях. Също така има сензор за сила отпред, за да засече кога се е блъснал!
This is an attachment for the Chain Monster robot and it accomplished three missions that are all push and deliver. It technically is not used for the M09 dinosaur toy, but this is because the toy is on the robot while the attachment is below the robot
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Precision mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Treadmill mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
Bowling pins mission model reworked from a LEGO Mindstorms EV3 version available at Bowling pins mission models. FLLCasts Off-season Challenge 2019 to a LEGO Education SPIKE Prime version available in this material. You can follow the same construction to assemble as many pins as you need. In 3D building instructions for you to construct them.
Yes, this is a single part. The whole instruction is a single part. This is not an error. This is the part that we use to demonstrate a flip attachment. For consistency even though it is a single LEGO Education SPIKE Prime part, we show the part visually, we don't just mention it in the comments.
Zatty is the smaller sibling if Zat. Zatty is small and cute. It's a car on a frame with 4 small wheels and of course two mini figures riding in it or on it. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my 7 years old daughter and then slightly improved by me and the colleagues.
Play time for a week: About an hour
This robot is designed to easily lift a cup while still holding it upright. With its motor attached to the side of the hub, the robot can lift the cup to any angle you want. You could replace the LEGO cup and make it lift real cups with a few adjustments. Be careful around liquids though, the robot doesn't like beverages like you do!
These are Alternative 3D Building Instructions for the Light Show mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition to be used with the Chain Monster Box Robot. A single accurate rotation of the white arrow indicates a perfect mission completion.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot.It collects Izzy using a rubber band mechanism, solves the M13 Craft Creator with a hook and M12 Virtual Reality Artist using a gear that goes into the mission model.
Обсервадор, от португалски, означава наблюдател.
Този стационарен робот има сензор за разстояние, свързан към мотор. Направен е така, че да изглежда като фар и наблюдателна кула.
An active attachment with a locking mechanism designed to carry, deliver and drop a large object without letting it go. It accomplishes the FIRST LEGO League 2021-2022 Large Delivery mission
This is an innovation construction for accomplishing the FIRST LEGO League 2020 Replay Innovation project mission. The goal of this project is to build something new and innovative during the competition.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Weight Machine mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Rowing Machine Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
These are 3D Building Instructions for an Alternative Music Concert Lights and Sounds mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to be detached, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.