This video tutorial shows how the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video is part of a series where we show you how our Box Robot accomplished the M07 Swing mission 10 times. This mission has a black and white line parallel right next to it, the only thing you need to figure out is how to avoid the first supporting beam of the swing. The Dominator robot waits to be clear of the beam and then uses the x-y movement of its front mottors to position the lever so it pushes the swing loose. After that the robot moves back and is ready for action again.
This quick pinless attachment is designed for collecting parts by pushing them. It shows the principle of putting a robot of an attachment in a very fast manner. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this video tutorial we would discuss the M13. OBSERVATORY mission from the FIRST LEGO League robotics competition 2018-2019 Into Orbit. This is an easy mission. You can accomplish it by pushing the level with the robot. The challenge is that there is not enough space to move with the robot around the attachment. Let's discuss how we could achieve it.
The M08. AEROBIC EXERCISE is one of the very common types of mission in FIRST LEGO League robotics competitions. I think this pattern of missions was first introduced with the growing abilities of the participating students that were constantly reaching the maximum number of points. So the competition introduced mission that require a lot of time - 20-30 seconds, are time consuming and are complex. They requires a lot of moves. This here is a video tutorial on how it could be accomplished
This video tutorial focuses on M01, M02, and M14 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. The Chain Monster box robot (a LEGO Education SPIKE Prime robot) uses a single attachment to accomplish all three missions in sequence. First, it pushes the mission model, then presses down the next one, and finally collects some mini-figures.
This video tutorial had a different idea than what we recorded. We planned for a push/pull attachment as we've shown such attachments for LEGO Education SPIKE PRIME and LEGO MINDSTORMS EV3. However, the issues with LEGO MINDSTORMS Robot Inventor set 51515 is that we could not figure out an easy way to build a push pull attachment that meets our criteria for an attachment. Because of this we made a slight modification on the idea and it is again push/pull attachment but not moving in a line but in a circle - circular movement.
This is the 10 out of 10 version of executing 3 missions in a single run. It worked like a charm! 10 times. We push and collect energy units for the FIRST LEGO League 2022-2023 SUPERPOWERED Challenge competition.
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes the M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses detachable attachments.
In this run, the robot performs five actions: it collects the M15 minifigure and throws it backward, rotates the chicken for M12, and then pushes and pulls the M13 Craft Creator mission model. All of these actions are completed in under 15 seconds!
This video tutorial is part of the 10 out of 10 series at FLLCasts and we will demonstrate how to accomplish the FIRST LEGO League 2020 RePlay competition mission called Innovation Project. Our goal is to push the construction to the require place on the field. What you will learn with this tutorial is how to place a random construction in the base and push/pull it to a place on the field 10 out of 10 times.
This is a 10 out of 10 tutorial demonstrating the consistency and reliability of a LEGO Education SPIKE Prime robot when the robot delivers a mission model to a specific position on the field.
This is a video tutorial on accomplishing M12 and M13 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We've decided to combine the two missions and approach M12 in a slightly different way - by activating a gear wheel and thus rotate the chicken. The mission is accomplished in almost no time and the result is flawless. The robot is Chain Monster, a powerful LEGO Education SPIKE Prime robot.
This is a video tutorial that demonstrates how to accomplish M06 and M07 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot which is a LEGO Education SPIKE Prime robot equipped with an active attachment with gear wheels, which engage the mission model’s gears to rotate the respective parts. The entire run takes less than 3 seconds, delivering a neat and precise performance.
In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.
In this video tutorial we deliver the Innovation project model from base to the cargo connect marker on the field. The goal of the mission is to deliver. The mission model is assembled before that.
This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.
This is a 10 out of 10 tutorial that demonstrates the consistency and reliability of the robot to complete the Unused capacity mission. In this mission, we do not need any guidance to push the model as it is near the west side where it should arrive.
"Sometimes it works, sometimes it does not work" - this is the most common case in FIRST LEGO League competitions. In this tutorial, we demonstrate and discuss such a case where the first part of accomplishing the mission always works but the second part has about 60-70% success rate. The robot is not very consistent. Let's take a moment to see it and explain why so that we can resolve the problem in the next lesson.
In this video tutorial, we focus on M10 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster, a LEGO Education SPIKE Prime robot, equipped with a three-axle attachment. The mission's objective is to lift the sound mixer sliders and position them precisely to score the maximum points. While the mission may seem challenging at first, once you understand how the attachment works and how to properly connect it to the robot, it becomes a breeze. Let’s give it a try!
This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.
10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try
This video tutorial demonstrates the consistency and reliability of the active attachment that pushes the two mission models. The goal is to use both the attachment and the robot to push the mission model and move the truck and the plane after the blue lines.
In this video tutorial, we use the motion sensor and demonstrate 10 out of 10 times how we can keep the robot moving in a straight line. The program is described in the previous tutorial in the lesson where we enter into the programming. Here we visualize how consistent and reliable the behavior of the robot is.
In this video tutorial, we demonstrate how to complete M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We use the MiniBox, a robot built from LEGO Education SPIKE Prime.
To complete the missions, the robot rotates the chicken to trigger the M12 Virtual Reality Artist, pushes the M13 Craft Creator to release the creation, and collects the M15 LEGO minifigure. After completing all tasks, the robot detaches its attachment and leaves it on the field for a faster change at the base. Let's take a look!
In this video tutorial we accomplish the Unused Capacity mission by pushing the mission model outside of the field in the area where we are allowed to touch the robot. We deliver the mission model to the side of the field. Before delivering, we must of course reach it and that's not always easy.