In this tutorial, we would look at how to connect the front motor of the car to the L298N motor driver. The driver is already connected to the Raspberry Pi or if it is still not connected you should connect it now.
To access the full video please subscribe to FLLCasts.com
- #798
- 23 Feb 2018
TL. DR.
"Right" cable from front motor goes to Output 3. "Left" cable from front motor goes to Output 4.
Front motor to Motor Driver
Make sure cables are extended. Connect the loose ends to the PCB Terminals (what a nice word we've learned).
Courses and lessons with this Tutorial
This Tutorial is used in the following courses and lessons
Perfect STEM course. Module 1 - Smart Car with Raspberry PI
Disassemble a remote control car. Change the brain of the car with a smart computer like Raspberry Pi. Build a smart device with artificial intelligence that you could control from your phone and that could freely navigate itself in the real world and on the Internet. Use your hands. Develop programs for your robot and your phone. Be curious and invent.
The perfect course lives up to its name. You move through the content, we check it and return feedback to you.
In the end, you should be able to better understand how to program and design smart devices that would make the world a better place. For everybody age 12+, 16+, 21+, 35+, etc. The hardware costs about 150$. It changes through the years so it might take some time for you to find it as Raspberry PI, motor drivers, power banks and h-bridges.. they change. Note that the course was designed to be led by a teacher with a decent knowledge in embedded hardware and software. This, on the other hand should not stop you, if you are curious.
- 118
- 42:47
- 136
Connecting front car motor to the Motor Driver
In this tutorial, we would look at how to connect the front motor of the car to the L298N motor driver. The driver is already connected to the Raspberry Pi or if it is still not connected you should connect it now.
- 1
- 0
- 3
- 3d_rotation 1