Use any blocks that you wish to solve the following task.
- #412
- 17 Apr 2017
- 0:58
Steps
The robot accelerates in small steps to 100% power.
Move some distance at 100% power.
Then the robot slowly decelerates to 0% power.
Condition
All the time the cup is on the display of the brick and does not fall off.
Of course, don't attach the cup to the display, just place the cup on the display.
English
A task for you. Using only the blocks that you know or using any of the blocks of the software, of course, we won't stop you. Try to implement a program where the robot accelerates in small steps to 100% of the power of the motors. And at the end the robot should be moving with 100%. Then the robot decelerates to 0 and the cup does not fall. The cup always stays on the display of the brick. Without you gluing it or in some other way attaching it. Just placing the cup on the brick screen. Try to program the robot to accelerate to 100 and then decelerate to 0.
Courses and lessons with this Tutorial
This Tutorial is used in the following courses and lessons
EV3 Phi. Introduction to robotics with LEGO Mindstorms
The things that you will be able to do with your EV3 robot by the end of this course are:
Freely move your robot towards desired target;
Avoid obstacles on the path of your robot using sensors;
Follow lines of any shape;
Detecting and picking up objects of any kind;
- 92
- 220:20
- 36
Make the robot consider the cargo. Inertia and Acceleration
Robots could do chores for us and they must consider the load of the cargo or the robot could be damaged.
- 11
- 0
- 5
- 3d_rotation 0