Programs -

• Steering

In this program we demonstrate how to program a SPIKE robot to align to а line with the aid of two color sensors while moving backward. Make sure the line is big enough for the sensor to detect it. For this program to work, the sensors must be placed in front of the wheels.

This program was intended for and tested on the Gazon robot

In this program we demonstrate how to program a SPIKE robot to align to а line with the aid of two color sensors. Make sure the line is big enough for the sensor to detect it. For this program to work, the sensors must be placed in front of the wheels.

This program was intended for and tested on the Gazon robot

In this program, we demonstrate how to follow a line with a SPIKE robot and then align to that line. That way the robot can position itself at specific distances on a predetermined path.

This program was intended for and tested on the Gazon robot

In this program, we present an "MY BLOCK" that follows a line presented as a yaw angle from the robot's starting position. If the program acts differently when tested again, then the most likely problem is the direction the robot is facing, when starting the program. Make sure to place the robot at the correct starting position with the correct facing direction, before every test.

This program was intended for and tested on the Gazon robot

In this program we demonstrate how to program a SPIKE robot to use acceleration to improve movement accuracy.

This program was intended for and tested on the Gazon robot

In this program we demonstrate how to program a SPIKE robot to follow a line with the aid of one color sensor and detect an intersection with another color sensor. Make sure the line is big enough for the sensor to detect it and react to it. For some thinner lines, the speed of the robot can be lowered, but if that does not help, the program can be easily adapted to work with reflected light intensity.

This program was intended for and tested on the Gazon robot

In this program, we demonstrate how to program a SPIKE robot to follow a line with the aid of one color sensor and detect and stop at the second intersection with the aid of another color sensor. Make sure the line is big enough for the sensor to detect it and react to it. For some thinner lines, the speed of the robot can be lowered, but if that does not help, the program can be easily adapted to work with reflected light intensity.

This program was intended for and tested on the Gazon robot

In the SPIKE software, the acceleration block works only with predetermined rotations of the wheels. That limits us from using acceleration with the motion sensor, so in this program, we present an "MY BLOCK" that can simulate the acceleration block, but with the use of the motion sensor.

This program was intended for and tested on the Gazon robot

In this program we demonstrate the accuracy with which the robot moves, and that the cost of moving the robot without the aid of sensors is acceptable at short distances.

This program was intended for and tested on the Gazon robot

Program used for the drop attachment. Move the robot, interact with the mission model and release the wheel from the drop attachment.

Use Scratch to activate the attachment that will accomplish the Power Switch mission

Activate the drop attachment with a python program

Activate the heavy lifting attachment.

Program for activating the active attachment using in FIRST LEGO League.

Activate the heavy lifting attachment with a Scratch program