Programs -

• Attachments

-

• LEGO Education SPIKE Prime

This program makes the Swing Game - LEGO SPIKE Prime robot move the two LEGO figures based on input from their respective controllers.

The color sensor controller uses the colored plate above it to determine movement. If the sensor detects blue, the LEGO figure moves forward. If it detects purple, the figure moves backward. Any other color will make it stop.

The motor controller works similarly. If the motor turns more than 30 degrees forward, the LEGO figure moves forward. If it turns more than 30 degrees backward, the figure moves backward. If it stays within that range, the figure stops.

The goal of the game is for both LEGO figures to reach the center without tipping the swing to either side. Good luck—and have fun!

This program makes Larvy - LEGO SPIKE Prime larva robot move forward indefinitely! The movement of this robot is very interesting as it works like a caterpillar or larvae! The program works by repeating 3 movements every cycle of the loop:

1. the front motor rotates for 90 degrees, rising or collapsing its wheels
2. the large motor rotates for 90 degrees, contracting or expanding the robot
3. the back motor rotates for 90 degrees, rising or collapsing its wheels

You may notice that every movement command does two things, or the same thing but a different direction. That is done using a variable that is either 1 or -1, and that gives the direction that the motors should move. This variable is also used to determine which motor should use full power and which shouldn't so that the robot doesn't break itself!

When running the program place the robot as already aligned to the black line before the mission model

The program should be easy to execute. It basically moves the robot forward