This program was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot with the Cargo Connect M13 Platooning Trucks attachment. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.
This program was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.
We use motion sensor to move straight with the LEGO Education SPIKE Prime robot and to control the configurable attachment needed for the sorting mission from FIRST LEGO League 2021-2022 Cargo Connect challenge.
The program uses the light and color sensor along with the motion sensor to accomplish the mission. It contains a few interesting tricks on detecting lines and configuring the behavior of the robot with specific params.
This program helps us move forward with the LEGO Education SPIKE Prime robot and the motion sensor. Moving forward and keeping a straight line is important to be able to build a consistent and reliable robot.
This program was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot with the Cargo Connect M09 Train Tracks attachment. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.
This program uses the Ultrasonic Sensor and the yaw angle detected by it. It aligns the robot to a border and gently pushes on a mission model.
The robot moves and turns with this program to accomplish the M02 Unused Capacity mission where we have to Deliver/Push a mission model
This program was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot with the Cargo Connect M05 Switch Engine attachment. It is meant to help the robot complete the 5th mission of the FLL Cargo Connect competition.
This program was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot with the Cargo Connect M03 Unload Cargo Plane attachment. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.
This Scratch program is for accomplishing the M01 innovation project model mission. It programs the robot to move forward and deliver the mission model to the designated place
The program uses the motion sensor and controls the motors of the robot.
In this program we demonstrate how to program a SPIKE robot to execute a faster and more accurate turn. You can press the right button to see how the robot executes a 90-degree turn with the aid of acceleration, to improve accuracy. After that, you can press the left button to see the robot turn fast with to acceleration, overshoot the target angle, and then return slowly back to it. That way, the robot reaches the target angle faster and more accurately. This method is useful for larger turns when time is limited. For smaller turns, it may cause the opposite effect. Since the robot, this program was made for, is a little tilted, the angle it is programmed to turn to is changed a little to compensate for the tilt.
This program was intended for and tested on the Gazon robot
In this program we demonstrate how to program a SPIKE robot to align to а line with the aid of two color sensors. Make sure the line is big enough for the sensor to detect it. For this program to work, the sensors must be placed in front of the wheels.
This program was intended for and tested on the Gazon robot
In this program we demonstrate how to program a SPIKE robot to follow a line with the aid of a color sensor. In this program, we use the sensor value to calculate a number to feed in the "start moving" command. The numbers in this program depend highly on the size of the wheels of the robot, the distance between the wheels, the color sensor reflected light range, the wheels friction, and the speed at which the robot moves. The numbers in the program must be adjusted for every case, and are in no meaning optimal to use as is, in other projects.
This program was intended for and tested on the Gazon robot
In this program we demonstrate how to program a SPIKE robot to follow a line with the aid of a color sensor. Make sure the line is big enough for the sensor to detect it and react to it. since we are measuring reflected light rather than the color of the line, we can and have implemented multiple states line following.
This program was intended for and tested on the Gazon robot
In this program we demonstrate how to program a SPIKE robot to follow a line with the aid of a color sensor. Make sure the line is big enough for the sensor to detect it and react to it. For some thinner lines, the speed of the robot can be lowered, but if that does not help, the program can be easily adapted to work with reflected light intensity.
This program was intended for and tested on the Gazon robot