This program is a basic version of the game played with EV3 Kinesthetic and Memory Game. For the program to work correctly, there must be one touch sensor module attached to port 1, one lever module attached to port B, and one gyro module attached to port 2. The other modules are not required from this program.
The block has the following parameters from left to right:
Attention! This block is made only for robots with two driving large motors on ports B and C and one steering medium motor on port A!
Detailed explanation of how to use this myBlock is written in the tutorial How to use the CarControl MyBlock.
This program is the most basic version of the game played with EV3 Kinesthetic and Memory Game. For the program to work correctly, there must be two touch sensor modules attached to port 1 and port 2. The other modules are not required from this program.
This is a simple demo program for Winner - VEX IQ Competition Robot for the 2018-2019 Challenge.
Using the On for degrees (rotations) option of the the Medium Motor Move Block you program the motor to rotate for the given number of degrees. However, sometimes is useful to program the motor to go to a given position, instead. To achieve that you can use this block. It takes the start position of the motor as 0 degrees. Then when you run the block with given number of degrees it just rotates the motor to that position. For exaple if your current position is -20 degrees and you run the block with 30 degrees, the motor will rotate for 50 degrees. But if your current position is 10 degrees the same program will rotate the motor for 20 degrees.
You can find the Iqazator instructions here. This program allows the Iqazator to patrol the area, mainly by looking mean. It also allows it to stay hidden for a while and then perform a surprise attack.
This project is for Robotics Supreme - LEGO Mindstorms EV3 yacht robot. It contains three programs.
The first one follows a line using one color sensor and detects if the robot has been pushed. Then it plays an alarm and stops the program.
The second program makes the robot go in a square, using the gyro sensor wait-change block. This makes it one of the easiest square solutions there is.
The third program makes the robot follow a direction. That is accomplished similarly to the linefollowing, but instead it uses the gyro sensor and always follows a straight line.
This program is for Uylam - LEGO Mindstorms EV3 Steamship simulator robot. It is made as a lesson, to automatically find the best position for a ship in stormy weather, relative to the waves. The program has two parallel threads. The first one makes the robot move until the gyro sensor detects less amount of shaking done to the ship. Because of all the shaking, the readings of the gyro are all over the place and thats why we made a My Block, which acts like a filter, so that the readings are more accurate. The second thread starts the storm, which is controlled by a Large motor.
NOTE: The program contains my blocks, that will appear broken if you use any version before 1.3.0 of the EV3 Mindstorms Software!
This project is for Gen - LEGO Mindstorms EV3 pedalo robot. The program makes the robot follow an imaginary school of fish. It utilizes the gyro sensor to turn the robot accurately, which is a hard task for this robot, because of its strange wheels. Also because of those wheels, the robot usually has a constant steer in one direction, which we correct using the steering block and giving it a steer in the opposite direction!
This program gives your robot few reactions to having its button pressed. All of those reactions are added in the "Random" program, along with a function trying to predict the press of the button. The robot instructions you can find here.
This project is for Yolanda - LEGO Mindstorms EV3 Sailship robot. It contains three programs.
The first one simply moves the robot forward and in the middle changes the sail position.
The second one makes the robot follow the direction of the wind indefinetly, while the robot moves "around an island". The following the direction of the wind is achieved with the gyro sensor and a two-state program.
The third one makes the robot do the same as the second one, but now the following the direction of the wind is done with a 3-state program, which means that it has a state, in which the sails arent moving.
This program is for Iknathir - LEGO Mindstorms EV3 aircraft carrier robot. It makes the aircraft carrier robot start spinning the wheels on its motors immediately after starting it. Then, after the lever is pushed, the wheels contract together and shoot the paper plane in the middle. When the lever is pulled afterwards, the wheels get away from the center again.
This program uses only two blocks to accomplish the mission. It is your choice to use this program for Self Aligning Module Attacher for M06 - Space Station Modules attachment or Self Aligning Module Attacher for M06 - Space Station Modules program.
The block that constanlty increase the speed while turning. The goal of this is to reduce the acceleration of the robot when it starts turning so that no modules will fall.
There is only one input parameter in this block and this is the Angle on which you want your robot to rotate.
