Programs -

• Drop

-

• LEGO Education SPIKE Prime

In this program, we present an "MY BLOCK" that follows a line presented as a yaw angle from the robot's starting position. If the program acts differently when tested again, then the most likely problem is the direction the robot is facing, when starting the program. Make sure to place the robot at the correct starting position with the correct facing direction, before every test.

This program was intended for and tested on the Gazon robot

In this program, we demonstrate how to follow a line with a SPIKE robot and then align to that line. That way the robot can position itself at specific distances on a predetermined path.

This program was intended for and tested on the Gazon robot

In the SPIKE software, the acceleration block works only with predetermined rotations of the wheels. That limits us from using acceleration with the motion sensor, so in this program, we present an "MY BLOCK" that can simulate the acceleration block, but with the use of the motion sensor.

This program was intended for and tested on the Gazon robot

In this program we demonstrate the accuracy with which the robot moves, and that the cost of moving the robot without the aid of sensors is acceptable at short distances.

This program was intended for and tested on the Gazon robot

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 05 - basketball using Attachment for FLL 2020 RePLAY Basketball mission

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 07 - Robot Dance.

This Scratch (Word Blocks) program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 07 - Robot Dance.

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 08 - Boccia

This Scratch (Word Blocks) program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 08 - Boccia.

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 15 - Precision.

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 01 - Innovation Project.

This Scratch (Word Blocks) program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 14 - Health Units.

This Scratch (Word Blocks) program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 01 - Innovation Project.

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 10 - Treadmill

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 10 - Cell Phone

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 04 - Bench

This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 03 - Slide counter. Check out the lessons where this program is use for specific demonstrations and explanations on how the program works.