Building Instructions

Motivated by the five-minute robot, this robot has its own rails!

This device is designed to be attached to "LEGO Mindstorms Robot with a large inertia cargo". It is a color sensor that goes on the caster wheel of the robot. In this case, the sensor will follow the robot.

This is a print ready vinyl mat that contains 7 barcodes and 15 products. The barcodes are not symmetrical and can yield different product result depending from the scanning direction - left to right or right to left. This mat is used in lesson 6 of level 3.5 Measurement tools.

Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.

Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.

Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.

Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.

Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.

Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.

Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.

Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.

Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.

This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.

This robot was made to count coins. The door slides, making the gyro sensor rotate, and by doing that, allowing the robot to measure the size of the coin that enters the safe. By changing the points where the gyro's beam connects, the sensor's thresholds change.

Remilo comes from esperanto and means paddle.

The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.

Value was inspired by the spy vehicle robot. This little robot was built to measure the volume of the room he's in.

The name comes from the worlds most expensive yacht, History Supreme, purchased for around 5 billion US dollars form an anonymous Malaysian buyer.

Robotics Supreme is a robot made to resemble a yacht. For that purpose it is made to look very long and its front comes to one point. It uses two large motors with tyres to move. On the front it also has a color sensor, placed so the robot can follow a line. On the back it has a Gyro sensor, so that it can turn correctly.

Uylam is a robot that simulates a stormy environment for its ship. It is made using two piston-like mechanisms powered by a Large motor and offset by 90 degrees to create shaking similar to that of big waves. The ship itself is made out of a medium motor on a turntable and a gyro sensor attached to them. The purpose of this is to explore what is the best position of a ship compared to the waves, so that it sustains the least amount of shaking.

The Laboratory is a robot that tests your programming skills. You will have to measure the volume of a balloon, only by the values you receive from the sensors. 

It has a valve, that allows you to deflate your balloon at different rates.

How to place the balloon in the robot is explained in this tutorial.

This a the Dinore3x, the predecessor of the mighty Triceratops. This is one of the classic EV3 robots provided by LEGO.