Building Instructions -

• EV3-G

Are you a football fan? Here are the building instructions you'll need for the construction of the Football Goal, if you decide to play it with a Mindstorms 51515 Robot Inventor set. You'll also need to build the smallest robot Tricky with its Kick the ball attachment. The Mindstorms/Duplo ball is included in the set.

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Chain Reaction
3. Basketball hoop

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is the VEX advanced skills training ground for building your driving skills. Here you have to pick up the construction and put it on the table at the opposite side of the table and then go to finish. It is the single player mode field because it is designed for a single robot to run on the field.

This table is like the first VEX training ground for developing your driving skills, but is for two robots. The idea is to come first to the final without interfering with the opponent robot. 

100x70 cm

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.

These are 3D Building Instructions for an Alternative Augmented Reality Statue mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for an Alternative Movie Set mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

These are 3D Building Instructions for an Alternative Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

These are 3D Building Instructions for an Alternative Craft Creator mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This construction is ment as a addition to the base line following robot with exposed sensor.

In Maltese, "orrur" means "horror."

This robot consists of two parts. The first part is a hub connected to a distance sensor that remains stationary. The second part is a mini wind-up car that moves forward using a rubber band. When the car passes in front of the distance sensor, the hub displays a scary face, creating a haunted ride effect. Can you add something even scarier to enhance it?

A simple SPIKE Prime grabber.

A somewhat complex grabber using SPIKE Prime.

A complex SPIKE Prime grabber.

In Portuguese, "observador" means "watcher."

This stationary robot has a distance sensor connected to a motor. It is designed to resemble a lighthouse combined with a watchtower.