Building Instructions -

• Ubuntu

This is the Corals mission model from the World Robot Olympiad 2023 Elementary competition in 3D assembly instructions.

This is a pinless attachment for a LEGO Education SPIKE Prime robot that uses the Ultrasonic sensor. The attachment could be placed on top of the robot. As it is pinless, it is easy to quickly place and remove it.

Uydu, from Turkish, means satellite.

Instructions for a LEGO SPIKE Prime robot, that has an inbuilt holder for your phone! The robot also moves with 2 medium motors.

Containers mission models reworked from a LEGO Mindstorms EV3 version available at 778-containers-mission-models-fllcasts-off-season-challenge-2019 to a LEGO MINDSTORMS Robot Inventor version available in this material. In 3D building instructions for you to construct them.

This is a light shield over the color sensor. Covered from the light the color sensor is much more precise.

This is a distance sensor attachment for Gazon 2.0, a LEGO Mindstorms Robot Inventor robot with a single sensor. This attachment is place on the robot whenever we want to work with the LEGO MINDSTORMS Robot Inventor Distance Sensor.

This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.

This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.

These are instructions on how to build the:

• 3x Gray containers

You can find more building instructions and tips and tricks about the competition on this page.

The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.

Are you a football fan? Here are the building instructions you'll need for the construction of the Football Goal, if you decide to play it with a Mindstorms 51515 Robot Inventor set. You'll also need to build the smallest robot Tricky with its Kick the ball attachment. The Mindstorms/Duplo ball is included in the set.

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Chain Reaction
3. Basketball hoop

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is the VEX advanced skills training ground for building your driving skills. Here you have to pick up the construction and put it on the table at the opposite side of the table and then go to finish. It is the single player mode field because it is designed for a single robot to run on the field.

This table is like the first VEX training ground for developing your driving skills, but is for two robots. The idea is to come first to the final without interfering with the opponent robot. 

100x70 cm

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.

These are 3D Building Instructions for an Alternative Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.