Building Instructions -

• Ubuntu

This robot extends the Tetrix Box Robot chassis for FTC competitions with an additional arm. The arm could be used for lifting and placing objects and could be quite useful. 

There is a special rubber band at the end of the arm, because there are not enough parts in the Tetrix set and we had to use a rubber band. But the principle of the arm is interesting, useful and you should be familiar with it - the arm keeps the motors always in the right orientation.   

Let's build a robot with treads. These building instructions are for a Guard Tank Robot. The good thing about tanks is that they could tackle a lot of obstacles on their way. At least this is what people are saying. Try it. Could you move over LEGO parts with this tank if they are one brick tall, or two bricks tall? What would be the largest obstacle that you could find, over which this tank could still move? Share a video or picture below in the comments section.

We would admit that this tank lacks a gun or an arm, but it is up to you to build one.

Building instructions for a LEGO Mindstorms EV3 robot where the motors are placed in an unusual manner. They are vertically placed on the sides. This robot construction base is very convenient for a quick and interesting robot on which you could build. 

There are so many ways to attach the motor to a Mindstorms Brick. We haven't counted them, but we sure like to experiment with them. This is one way. Not the perfect, not very stable sometimes, but you could also learn from prototypes and "mistakes". And the LEGO brick is on the same level as the motors. Follow the building constructions and have the motors attached to the sides of this Mindstorms Base construction. 

The third version of the EV3 Easy Bot. This is a simple and easy to follow robot, that aims at showing the use of tyres on robots. The robot has a gear up ratio and no tyres, so it is quite fast and entertaining.

Shows the pipe attachment constructions that is mounted on the robot. The pipe is than mounted on this constuctions

LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use. 

Building instructions for a LEGO Mindstorms Robot that cleans the landing site when landing on a different planet. Built from an EV3 set it is a perfect simple tank robot with continuous tracks for lifting and moving things. Basically cleaning.   

The goal of these building instructions is to build a LEGO Mindstorms EV3 robot without wheels. You should then decide on your own how exactly to add the wheel. Which wheels would you use at the front? How are you going to build the third wheel? Here are some recommendations on building the third wheel - 1,2,3,4 

Building a third wheel for a LEGO Mindstorms EV3 Robot is always an interesting and challenging task. These building instructions are for a third back wheel. You can even notice that there is no wheel involved. It is just LEGO parts but it is one of the most stable ways to build a third wheel. There is some friction, of course, but not that much.

Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.

The attachment is constructed from LEGO Mindstorms EV3 sets.

This is a simple robot, variation of the Earl bot using treads. You can use the attachment to kick balls sideways. The robot is useful in STEM classes where students have to construct robots quickly.

Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.

This is a gun which is build from EV3 Lego Mindstorms set. It can load small EV3 Beams and shoot them.

This is the simplest possible line following robot. It has just one sensor in the front between the two driving wheels and uses beams as pivots instead of a third wheel. Try it out. Follow the building instructions and start following lines in a number of minutes.

This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.

Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring. 

The first thing every student wants to build is a LEGO Mindstorms EV3 robot with treads. Well, we have one. Take a look. It's really funny.

Can you make it move? Send us a video or picture in the comment section below.   

We've built a box robot chassis that could easily be extended with attachments for FIRST Technical Challenge competition.

If you ever felt that FIRST Technical Challenge is difficult and you don't know where to start from, building this Tetrix robot is the first thing that you could do. You would have 4 motors, plenty of space for attachments and good access to the phone.

The robot is built from a Tetrix Set without additional parts. It's a winning robot in just 109 steps 

Don't we all love animals? But it is sometimes difficult to have a puppy at home. Presenting to you - the Puppy robot (drums in the back). It has some of the benefits of a Puppy - it is small, it can follow you with the Ultrasonic Sensor and it can bark (if you program it to). Follow the building instructions. Use it at home or at class.

These are the official robot rules for the FIRST LEGO League Hydrodynamics 2017-2018 robot missions.