Building Instructions -

• EV3-G

Building instructions for the gear attachment. 

Instructions for building the five minutebot used in the tutorial.

In Finnish, "kuhmu" means "bump."

This robot was designed to resemble a bumper car and to teach a very important lesson about inertia and the center of mass! Its hub is attached pinlessly to the construction, allowing you to move it around and experiment with the robot's center of mass. The robot moves using two wheels attached to two medium motors. It also has a force sensor in front to detect when it bumps into something!

This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.

These are instructions on how to build the:

• Doorstep
• Package

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Turbine blade
• Blue holder

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Cargo ship

You can find more building instructions and tips and tricks about the competition on this page.

This is an innovation construction for accomplishing the FIRST LEGO League 2020 Replay Innovation project mission. The goal of this project is to build something new and innovative during the competition.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Treadmill mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Rowing Machine Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

Bowling pins mission model reworked from a LEGO Mindstorms EV3 version available at Bowling pins mission models. FLLCasts Off-season Challenge 2019 to a LEGO Education SPIKE Prime version available in this material. You can follow the same construction to assemble as many pins as you need. In 3D building instructions for you to construct them.

Yes, this is a single part. The whole instruction is a single part. This is not an error. This is the part that we use to demonstrate a flip attachment. For consistency even though it is a single LEGO Education SPIKE Prime part, we show the part visually, we don't just mention it in the comments.

Zatty is the smaller sibling if Zat. Zatty is small and cute. It's a car on a frame with 4 small wheels and of course two mini figures riding in it or on it. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my 7 years old daughter and then slightly improved by me and the colleagues.

Play time for a week: About an hour

This robot is designed to easily lift a cup while still holding it upright. With its motor attached to the side of the hub, the robot can lift the cup to any angle you want. You could replace the LEGO cup and make it lift real cups with a few adjustments. Be careful around liquids though, the robot doesn't like beverages like you do!

These are instructions on how to build the:

• Boccia share

You can find more building instructions and tips and tricks about the competition on this page.

This module is made to look like a head of a ram made with LEGO Mindstorms EV3. It uses an ultrasonic sensor, which points down as if it is going to attack, as the eyes of the head. It can be combined with other modules to create the perfect ram robot!