Building Instructions

Purpose

We want students to be able to easily find the parts and to put the parts back in the designated compartments.

Printing instructions

Files are printed on both sides of 160-gram sheet of paper A3 format.

The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.

To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.

Turning direction

We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.

Remilo comes from esperanto and means paddle.

The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.

This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge

The run with this attachment is very inconsistent and fails very often.

In this spreadsheet, we have the values for the Integral part and the Gyro sensor for moving straight with the robot.

Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.

The building guide for the FIRST Technical Challenge Push Bot build with the Tetrix set

Building instructions for the gear attachment. 

Instructions for building the five minutebot used in the tutorial.

In Spanish, "huracán" means "hurricane."

This robot is designed to resemble a hurricane-type carnival ride. It has two seats for LEGO minifigs, each attached using a flexible hose part. The robot spins them around using a medium motor. This can be controlled using a force sensor, which looks like a clown and stays at a safe distance from the ride!

In Maltese, "Ikkomunika" means "to communicate."

This simple robot is powered by two medium motors. Its controller is tilted for easier screen communication. However, the back two wheels seem to have a problem. Can you figure out what it is?

Third version of a reusable gear attachment. In this scenario a single motor could power two different axles in two different directions. If you use it to accomplish a mission do not forget to send us a video. We would love to see it.

This 3D building instruction is about a FIRST LEGO League 2020 mission called the Slide mission. To accomplish the mission the LEGO Robot must take two LEGO minifigures from a slide and bring them back to base. The whole attachment is built only with parts from LEGO Mindstrorms Robot Inventor Set.

These are instructions on how to build the:

• Doorstep
• Package

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Turbine blade
• Blue holder

You can find more building instructions and tips and tricks about the competition on this page.